Metal mesh welding machine
1. Feature

1. Main unit: Welded with thick steel sheet and section steel, strong and concise.
2, Welding electronic control system: PLC digital system, one time pressing, separatewelding. Precise control and stable function.
3, Wire laying devices: Auto weft wire feeding device. Easy to handle, high welding speed.
4, Wire mesh opening setting: PLC digital control.
5, Weft wire arranging: auto arranging.
6, Inner transformer: High efficient welding transformer. With 8 Grade adjustment.
7. Welding machine applied: Wire mesh fence, fencing mesh and welded mesh panel.
2. The spcification of metal mesh welding machine

Wire diameter	2.8--4.5mm	warp form	wire coil
weft wire spacing	50--200mm	weft form	wire coil
Warp spacing	50--200mm	Rated voltage	380v
welding width	1600mm	Rated power	120KVA*4
Welding speed	45times/min	Overall dimension	2200*2400*1800mm
welding point	33	weight	3.5T

Note: special type can be mde according to the client's requirements.

3. Operating conditions

1. Temperature between - 10 ° C and + 40 ° C.

2. Height is less than 2000 meters above sea level.

3. Must not have the corrosive gasthat seriously affect the insulation performance of welding machine, chemical and corrosive, explosive medium and so on in the working place

4. No serious shock

5. The wire is clean

4. Maintenance:

1. Before welding, all switches and buttons must adjust to the right position to produce
2. The machine should work according to parameters and must not overload to reduce equipment fault
3. Clean the electrodes, modification or replacement, regularly in order to protect the quality of the machine.