Skype firealarm87  /wechat 15220176087

I. Product overview

the detector is suitable for such industrial and civil Buildings that have a great deal of heat when fire takes place, such as Kitchens, boiler rooms, generator rooms, drying workshops and smoking rooms and Is not suitable for places with a great deal of smoke but little heat.

II. Product features

    It can realize electronic coding and rewrite the address via Coder in situ.

    Within a single-chip microcomputer, it can realize real-time Data acquisition and processing, realize a curve tracing for the field Situation.

    It has a temperature compensation function and a sensor fault Detection function (fault reporting  to fire Alarm control panel).

    Non-polarity, two-bus connection that ensures Convenient installation and maintenance.

    Designed with an upper cover and a lower cover and installed on an independent base, it can be installed, debugged and maintained Conveniently.

III. Technical parameters

1.      Executive standard: GB4716-2005

2.      Operating voltage: 24V (pulse modulation)

3.      Operating current: 300uA (monitoring status) or 1.5mA (alarm status)

4.      Work indication: the red indicator will blink in the Monitoring status or remain lit in the alarm status.

5.      Weight:about47g

6.      Product class: A2

7.      External Dimensions: diameter:100mm, Height:56mm(with the base)

8.      Wiring method: non-polarity Two-bus system (L1, L2)

9.      Operating environment: Indoor, temperature: 10+50; Relative humidity: 95% (402, without Condensation)

10.    Coding mode: It can realize electronic coding via coder in Situ. Address codes 1 to 324 are available for selection.

11.    Installation height: 8m

12.    Protection area: about60m². for details, see related provisions in GB50116-98Code for Design of Automatic Fire Alarm System.

13.     Matched host machine: fire alarm control panel (such as MN300)