4" Line Voltage New Construction IC Airtight Housing

Housing
Die-formed aluminum for maximum heat dissipation and rust protection
Designed for New Construction installation and suitable for using in non-insulation covered ceilings
Housing can be installed in 1/2" to 1-3/8" thick ceilings.
Housing is Non-IC rated must be kept at least 3" away from insulation

Hanger Bar
Allow housing to be positioned and locked at nay point within a 24" joist span.
Can be shortened for 12" joists
Can be positioned on long or short axis of the housing
Contain integral nail
Hanger fit onto T-bar spline for quick alignment

Junction Box
ETL listed for through branch wiring
2 in-2 out or 4 in-4 out J-box for your better choices
Designed for straight through conduit runs
1/2" and 3/4" romex wiring knockouts
Pre-wired junction box provided with removable access plate
Knockouts equipped with pry out slots
All leads are #18AWG wire, ground wire is connected to the bottom, quick connectors are supplied on all leads

Lamp & Socket
PAR16/PAR20/PAR20 LED/R20/R40
50W max.(See trim for max. wattage)
E26 Medium Base
CRI>80%
PF>0.9
Color Temperature: 2700K-6500K

Listing
ETL listed for damp location W/Feed through