Description

?        Adhesive sealings for automotive original glass, widely used in cars, buses, High-speed trains and other large windshield.

Technical Data for reference

Items	Technical Data	Detection method
Before cured
Appearance	black
Density(g/cm3)	1.15-1.25	GB/T13354
Tack free time (min)	50~60	GB/T13477.5 (23℃/50%RH)
Best operating temperature (℃)	15-30
Cured rate (mm/24h)	3-5
After cured
Tensilestrength(Mpa)	≥6	(23±2)℃, (50±5)％RH
Strength at break rate (%)	≥400	GB/T528
Tear strength (N/mm)	≥20	GB/T 529
Share-A-hardness	55～65	GB/T531
Cut strength (Mpa)	≥5	GB/T 7124
Work temperature (℃)	-40～90

Packing

?        310ml/cartridge, 600ml/sausage

Storage

?        At 8-28℃ shady, dry place,

?        310ml/cartridge, 9 months

?        600ml/sausage, 6 months

Application

?        Surface preparation: Clean all dirty, dust, loose particles by steel brush and clean all oily things with cleaning agent. All former adhesive must be cleaned out by scraping, paring, friction, jet of strong air or suitable ways. Make sure the surface be clean, free of dust and grease

?        Priming: Need to used cooperated with Huitian's activator 8902 and primer 8906. The general dry time of primer is 10-30 minutes. It all depended on the practical temperature.

?        Cured: The environment temperature and humidity will have great effect on the tack free time and curing of polyurethane. Low temperature causes slow curing; high humidity causes too fast tack free time. The best operating environment conditions as follows: the temperature 20 ~ 30 ℃, humidity 50 ~ 70% RH; please careful construction, if over this range. In the process of sealing and curing, avoid contacting with hydroxyl, amino and other chemical thins which will impact the curing of polyurethane.

Handling Precautions

?        Not contact sealant with food or cosmetics;

?        Not contact skin for long time about uncured sealant;

?        Rinse eyes with large quantities of water and seek medical check if sealant drops into eyes;

?        Not put sealant out of children

Pretest ProcessReliance will sample all related material and do testing to decide best adhesive type and best performance to preventing any potential problems. Please ask for Reliance's technician fro specifics.