Introduction 

The LTA-55 diaphragm jig machine is used in ores beneficiation such as pyrite, limonite, hemonite, galena, specularite, manganese, tungsten, tin, alluvial gold, alluvial tin, fluorite, barite, celestite. Jig machines of LTA series is kind of sinewave down-moving jig machine with two row and two or three chambers. Great beneficiation efficiency can be gained when they are used in beneficiation of minerals.

Structural Drawing:

LTA-55mining jigging machine transmits by the pulley of the eccentric shaft driven by the motor.The eccentric shaft bear form decentraction motion after the adjustment of the adjustment device and the connection rod will be driven to do the alternating movement. The other end of the connecting rod is fixed on the moving shaft of the moving frame. There is a supporting point connecting to the rack section in the center of the moving frame, so the moving frame will be driven to do the up-down alternating motion focusing on the supporting point. The down-centrum fixed on the moving frame move up-down alternatively passively to press the
water flow in the case to product waves and the waving water flow through the screen will dash the bed medium and the ore to do parabola motion. 
 Working Sites:

 Jig machine is a kind of gravity beneficiation equipment. Water used in ores processing is recyled, so a pool is needed and the water can be saved a lot 
 Usage:

LTA-55 diaphragm jig machine is widely used in ores beneficiation. When the specific gravity is different between the gangue and useful ores, the LTA-55 jig machine can achieve a good beneficiation result. Our engineers are available to go abroad to train the workers and adjust the jig machines.

engineers are available to go abroad to train the workers and adjust the jig machines.