LSW800L straight seam Aluminum welding machine
One, about the welding workpiece parameters and requirements
1, the workpiece parameters
A, the shape of workpiece diameter: 150 ~ 700 lengths of L ≤ 800 thickness 1 ~ 2mm
B, welding materials: aluminum, aluminum alloy
2, form: AC TIG welding
3, weld form: straight seam welding, the weld length is smaller than 800mm
Two, welding production process
1, artificial will work in welding core shaft, put down the ear hook;
2, the use of the device on, press the workpiece clamping;
3, select the automatic program, press the "start" button, the gun automatic drop in place, start welding;
4, the torch automatic walking to set the length of weld torch automatically after rising, and the rapid return;
5, the torch high restoration process, loosen the clamp artificial unloading.
Three,The basic parameters of welding equipment and components
1 structural characteristics
Plane composition: base, upright, cantilever beam, upper pressing frame (a plate), the agency, lug system, running mechanism, torch adjustment and the clamping mechanism, electrical control system.
2 basic parameters
Model parameter LSW-800L
Control power single phase 50Hz AC220V
Thickness range (mm) 1 ～ 2
Effective length (mm) ≤ 800
The maximum diameter (mm < 700)
Minimum diameter (mm) > 150
Speed range of 100 ~ 1200 (mm/min)
The running accuracy (mm) < 0.15
Lifting stroke (mm) 100
Shape (length * width * height) 1420/560/1250