Push bar –Steel pressed or stainless steel pressed
Head Cover – Steel pressed or stainless steel pressed
Spring – Stainless steel
5/8' throw, stainless steel.
9/16" , steel.
For 5/8" stop.
2-1/2" maximum, 1-7/8" pressed.
Non-handed, reversible for all functions and trims.
1-3/4" thick of wood or metal door. Specify thickness if other than 1-3/4" .
3' standard for door width of 2'-8" to 3'-0" ;4' standard for door width of 3'-8" to 4'-0" ,
4-1/4" minimum
40-5/16" from CL to finished floor recommended.
Furnished standard with sheet metal & machine screws or SNB as option.
For trim, knob, lever & thumb-piece type " Schlage C" key way.
1/4 turn, hex key dogging on non-fire labeled device.
For " Panic Hardware" and " UL" . Labeled (3 hours) fire exit hardware.
A156.3 Grade 1
Inside by slight pressure on any point of the push bar all time.
Big 8-1/2" x2-3/4" x2-1/2" (216mmx68.3mmx62mm) &
Small 6-1/3" x2-3/4" x2-1/2" (160mmx68.2mmx60mm)
US26, US26D, US32D (or other finishes upon request & discussion