| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | MS |
| Model Number: | 0009 |
| Application: | Fence |
| Material: | stainless steel 304 |
| Wire Gauge: | 2.5mm |
| Mesh Size: | 1000*2000 1500*3048mm |
| Hole Shape: | Hexagonal |
| Surface Treatment: | Black |
| Technique: | Perforated |
| Stainless Steel Flattened Expanded Metal: | Stainless Steel 304 Flattened Expanded Metal |
Quick Details
Specifications
Flattened Expanded Metal
Flattened expanded metal is manufactured by passing the metal through a cold roll reducing mill parallel to the LWD. It is Standard Expanded Metal that has been rolled through a flattening machine in the expanding process. By flattening the sheet, the bonds and strands are turned down to produce a smooth and flat surface – essentially elongating the LWD of the diamond.
Materials: stainless steel, carbon steel, brass, aluminum, nickel, Al-Mg alloy. GALVANIZED DIAMOND SIZE DIAMOND OPENING STRAND SIZE % WEIGHT PER (INCHES) (INCHES) (INCHES) OPEN STYLE SQ. FOOT SWD LWD SWO LWO WIDTH THICKNESS AREA Flattened - Carbon Steel 1/2" - 13F 1.61 0.500 1.25 0.265 1.000 0.107 0.078 52 3/4"- 9F 1.88 0.923 2.10 0.563 1.688 0.165 0.120 63 1-1/2"- 9F 1.25 1.330 3.20 1.000 2.563 0.158 0.110 75 Flattened Stainless Steel - (nominal weight only, no galvanize) #304 1/2" -13R 1.78 0.48 1.26 0.220 0.970 0.128 0.080 47 3/4"-9R 1.95 0.923 2.10 0.562 1.697 0.165 0.119 61 1-1/2" -9R 1.31 1.330 3.15 0.937 2.625 0.165 0.119 75 Flattened Aluminum - (nominal weight only, no galvanize) 1/2" - .081 0.42 0.500 1.27 0.312 1.000 0.105 0.060 58 3/4" - .125 0.62 0.923 2.13 0.625 1.750 0.187 0.095 62 1-1/2"- .125 0.41 1.330 3.15 1.000 2.750 0.181 0.095 70
Flattened Expanded Metal Features:
Lightweight.
Economical.
Versatile.
Low Maintenance.
Can be bent or formed in any direction.
U-edging for finished edges.
Flattened sheets:
1. Camber- The greatest deviation of a side of edge from a straight line after flattening shall not exceed 3/32 inch per foot (0.8mm per 100mm) of dimension.
2. Thickness- shall not be less than 70% of the nominal thickness specified for the sheet from the item produced.
3. Squareness- Ends shall not be more than 1/8 inch per foot (1 mm per 100 mm) out of square or 1/2 inch (12.7mm) overall.
4. Flatness (Levelness) – Sheets shall be free from waves or buckles that are in excess of 1-1/2 inch (38.1mm) from a plane surface.
Specifications:
SIZE