| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | GSM alarm system |
| Model Number: | GSM-X6 |
Quick Details
Specifications
Brief introduction
Product components: This product is composed of alarm host, basic accessories and optional accessories.
Alarm Host | Wireless Optional Accessories |
GSM LCD Alarm Host | remote, wireless intelligent door sensor(or wireless door sensor) wireless wide-angle PIR sensor, wireless indoor siren with sound and flash , gas alarm, smoke alarm, wireless outdoor siren, doorbell button |
Function Features
1 Touch keypad; LCD displays Date, Day of the week, Time, and current Armed Status
2 Supported Languages: Simplified Chinese\ Traditional Chinese\ English\ German\ French\ and more to meet different market needs..
3 GSM3/4 Band Net trasmission,phone audible alarming and SMS alarming
4 29 wireless zones (Each zone supports up to 4 sensors) and 2 dedicated zones for remotes (Supports up to 4 remotes or wireless keypads per zone). Supports 8 more wired zones(Optional).
5 Can preset up to 5 phone numbers and dial in sequence.
6 Intelligent logic analysis technology, corresponding zone number and sensor name can be displayed.
7 Record up to a 10 second greeting for the auto-dialer, Then play the greeting back.
8 Arm\ Disarm the system by 5 ways: SMS, Main Host(Keypad), Wireless Keypad, Keychain Remotes, or even remotely by phones. (PSTN alarm don't support SMS)
9 Available in AC\DC with Low-voltage Indicators
10 Learning sensors to alarm host, very easy operation.
11 Non-volatile chip, information stored automatically when off power.
12 Check door\window status automatically (This is when the system is disarmed only, if a door is opened, it will sound fast " bi bi bi" )
13 Support wireless " ding-dong" doorbell function (Optional)
14 Support CID uploading to CMS(Center monitoring Station) , can user our GSM CID connector to have this function.
15 Disconnection alarm, auto priority to occupy the telephone and monitoring function to hear what is happening.
16 Built-in Li-Ion backup battery, it will alert when low power or without external power supply.
17 Store up to 100 alarm records and 100 arm\disarm records
Understanding of the Products
A. Understanding of the Alarm Host
1. Specifications:
· Working power: AC=100~230V, DC=12V 1A
· Static current:<50mA (when not charging) Alarm current:<500mA
· Built-in Li-Ion backup battery: 3.7V 800mAH(rechargeable),
· Standby: around 16 hours, Full charging time: 12 hours
· 3-Band & 4-Band optional
· GSM transmit power: 2W
· Receiving and emitting frequency: 433MHz
· Working condition:Temperature: -10oC ~ 50oC Humidity: ＜80%
· Product dimension:168×112×26(mm
2. Zone types and definitions
Zone types: Perimeter zone, Motion zone, Emergency zone
Definitions:
· Perimeter zone: Detecting the space like doors, windows, etc., generally use wireless door magnet sensors and wireless curtain PIR sensors
· Motion zone: Detecting the space like living room, aisles and bedrooms, etc., generally use wireless wide-angle PIR sensors.
· Emergency zone: Detecting the space like Emergency area (such as emergency distress, medical rescue, gas leakage and fire alarm, etc., this zone keep 24-hour monitoring status automatically. Generally use panic button, wireless gas sensors and wireless smoke sensors.
3. Modes of arming
" Away Arm" mode: Once any detectors in perimeter zones or motion zones get triggered, the host will alarm immediately and meantime dial " #" automatically.
" Home Arm" mode: Once any detectors in perimeter zones get triggered, the host will alarm immediately and meantime dial " #" automatically. It will not alarm after any detectors in the motion zone are triggered.
4. How to operate the alarm host
· Preparation
1. Insert SIM card properly.
2. Fix the antenna
3. Connect the telephone cable: connect the telephone cable of telecommunication to " Tel in" port on the alarm host, then use the telephone cable attached in the package to connect " Tel out" port and telephone set.
4. Connect power: connect the power adaptor to DC port of the alarm host first, then plug it to the AC socket.
5. Turn on the backup battery
6. Check and see if GSM signal is good enough
Type | GSM Signal OK | Signal is not normal or SIM card not inserted properly |
3-Band (900/1800/1900 MHZ) | Signal indicator keeps flash about every 2 seconds | Signal indicator keeps on |
4-Band (850/900/1800/900 MHZ) | Signal indicator keeps flash about every 3 seconds | Signal indicator keeps flash about every 1 seconds |
· Signal level status
When standby, press" ▲" or" ▼" and you can see the signal status as below.
GSM Signal Level:
XX YY
XX: 0 …..31 indicates the signal from weak to strong,99 indicates unknown.
YY: Indicates signal status, OK is good, No is a little weak and need to adjust installation position.
Press " ESC" to get back for standby status. Or get back to standby status automatically after 30 seconds without no operation.
Note: If SIM card is not insert properly, it will shows:
NO SIM CARD:
XX YY
· How to program
Notes:
The host will exit programming mode if without any operation within 30 seconds
It will exit to the previous menu if press " ESC"
If enter codes by mistake for 3 times, the host panel will resume to the standby mode
you can press " ▲▼" to adjust programming info. Or to find alarming info.
· How to operate the Alarm Host?
1.Record: Keep pressing the " record button" on the back of the alarm host and speak close to the speaker of host. Then release, the voice recorded.
2. Play: Keep pressing the " play button" on the back of the alarm host and you will hear the previous record.
3. Arm: BY wireless remote: press the corresponding arm button and the host will beep once to successfully complete the operation
By Host panel(Keypad): [0 + master code + ENT + " ▲▼" + ENT] → " ▲▼" to choose " armed home" or " armed away"
4. Disarm: By wireless remote: press the corresponding disarm button and the host will beep twice to successfully complete the operation
By Host panel(Keypad): [ESC + master code + ENT ] →the host will beep twice to successfully complete the operation
5. Emergency: By wireless remote: Press Emergency key and the host will alarm immediately;
By host panel(Keypad): press " " , and the host will alarm immediately.
6. Telephone alarm: After receiving the call, you will hear the recorded voice message immediately, it can be played for 30 seconds repeatedly, then follow the below instruction:
6.1. Input " 8" to enter into the listening status for 20 seconds automatically, you can hear the alarming event sounds from phone. Each extra press of " 8" can prolong 20 second listening in.
6.2. Input" #" to play the recorded voice message for one time automatically
6.3. Input " *" , the host will end the call and stop dialing any auto dialer#.
6.4. Directly hang off the telephone, the host will end the call and automatically dial the next auto dialer#.
7. SMS reporting:Mobilewill get SMS like " System Alarming XX, YYYY" , " XX" means zone number, " YYYY" means the detailed sensor.
8. Arm remotely by phone: 30 seconds after successfully dial the telephone number of host, enter the password of host after the beep---enter 1 after beep—the host will automatically hang up after beep to successfully complete the operation.
Notes: You can set " Armed Away" remotely by phone, but keep notes that you can't set " Armed Home" by this way.
9. Disarm remotely by phone: 30 seconds after successfully dial the telephone number of host, enter the password of host after the beep---enter 0 after beep—the host will automatically hang up after beep to successfully complete the operation.
10. Arm by SMS: You can edit SMS " XXXXXXBF" to host panel, the host panel would arm automatically when getting this SMS, and also will message back to mobile " Arm successfully" .
Notes: Arm by SMS is only for " Armed away" !
11. Disarm by SMS: You can edit SMS " XXXXXXCF" to host panel, the host panel would disarm automatically when getting this SMS, and also will message back to mobile " Disarm successfully" .
12. Monitoring of door/window status: When the smart zone is ON, the arm operation is normal if all the doors or windows are closed. But if any door or window is open, the host will sounds " Di Di Di" and at the same time it has below displays alternately:
· Operation notice
Alarm processing mode: immediately after the system alarms, it starts to dial (or send SMS) in sequence from the 1st group number to the 5th group number(skip empty numbers) automatically. It dials (or send SMS ) circularly for three times, the answered number (or the number which received the SMS) will not dial (or send SMS) repeatedly.
Exit delay alert: the alarm host sounds " Di" every 1 second (door/window is closed) within preset exit delay time.
Alarm delay alert: the alarm host sounds " Di" every 1 second within preset alarm delay time.
Alarm priority:
A. If the alarm host's own telephone line is accupied when it is alarming, it will cut it and make it unoccupied, at the same time dial out to report alarm event.
B. The alarm host's " Ding Dong" sound will switch to alarm sound and dial to report if it receives alarms signal when sounds " Ding Dong" .
External power supply cut alert: the alarm host sounds " Di" every 8 seconds.
Lower voltage alert: the alarm host sounds" Di Di Di" every 8 seconds when power gets very low.
B. Understanding of Basic Accessories (Wireless)
1. Wireless Remote
Features: | 1. To control the alarm host to arm and disarm. 2. With the emergency key for urgent help. |
Specifications: | 1. Operating power: 27A 12V alkaline battery 2. Emitting distance: ≥100m (in open area) 3. Service life: ≤1 year |
Installation and Usage: | 1. For users to take along. 2. Generally, press the " Away" key to arm before leaving home; and press the " Disarm" key to disarm; " Home" is setting " Armed home" , please take notes that " Arm Home" is only effective for sensors in Perimeter Zone (door sensor\curtain PIR sensor) and sensors in Emergency Zone (Like Gas sensor\Smoke sensor\Glass sensor\Emergency button), it is not effective all sensors in Motion zone(Like wide-angle PIR). 3. Please replace the batteries after one year usage and when you feel shorter control distance. |
How to program | Please refer to the descriptions of [Program Sensor]or Table 6. |
Note: | 1. You can only add 1 remote each time, totally 8 available to be added. 2. Each serial number is available to study 1 remote, the latter configured remote will be workable and the former one becomes not workable automatically. |
2. Wireless Intelligent Door Sensor
Features: | · Generally set as Perimeter zone. If any door or window is opened, it will transmit the alarm signals to the alarm host. |
Specifications: | · Operating power: 23A 12V alkaline battery · Frequency: 433MHZ · Emitting distance: ≥100m (in open area) · Service life: ≤1 year Alarm Distance: ＜4cm |
Installation and Usage | · Fix the part of magnet onto the door frame in a position of 1.6m above the ground to prevent any children from bumping onto it · Fix the part of emitting onto the door frame, make sure to keep the part of magnet and part of emitting in parallel, the space between the two parts shall be less than 10mm Upon the working light flashes frequently in red, please replace the batteries |
How to program | Please refer to the descriptions of [Set Smart Zone]. |
Note: | · You can only add 1 wireless door magnet each time, totally 4 available to be added. Each serial number is available to study 1 wireless door magnet, the latter configured wireless door magnet will be workable and the former one becomes not workable automatically. |
3. Wireless Door Sensor (Sames as Wireless Intelligent Door Sensor)
4. Wireless wide-angle PIR Sensor
Features: | · Mainly monitor and control indoor space, generally set as Motion zone. When human body enters into etecting area, the sensor will transmit alarm signals to the alarm host. |
Specifications: | · Operating power: 9V alkaline battery · Emitting distance: ≥100m (in open area) · Service life: ≤1 year Detecting distance: 110° 10×10m |
Installation and Usage | · Fix the bracket on suitable wall surface or in wall corner at a distance of 2~2.4m above the ground; · Open the sensor shell to connect the batteries well and adjust jumper line (short circuit " 5S" : The sensor will detect once every 5 seconds; short circuit " 5MIN" : The sensor will detect once every 5 minutes; Suggestion: short circuit " 5S" for testing and " 5MIN" for normal use; · Fix the sensor onto the bracket; · Adjust the sensor to a proper angle and then slide the power switch on the side to " ON" , and it will enter into the normal working state after 30 seconds; Upon the working light flashes frequently in green, please replace the batteries. |
How to program | Please refer to the descriptions of [Program Sensor]or Table 6. |
Note: | · You can only add 1 wireless wide-angle PIR sensor each time, totally 4 available to be added. Each serial number is available to study 1 wireless wide-angle PIR sensor, the latter configured wireless wide-angle PIR sensor will be workable and the former one becomes not workable automatically. |
5. Wireless Indoor Siren
Features: | · Work with alarm host, wireless receiving alarm signals, spot alarming with sound and flash With power plug, usually for indoor use. |
Specifications: | · Operating Power: 100~240VAC Receiving Distance:≥100 M(In open area) |
Installation and Usage: | · Plug the wireless siren into suitable indoor power socket Suggestion: Generally around 1.8M from the ground |
How to program | Please refer to the descriptions of [Program Sensor]or Table 6. |
Notes: | · You can only add 1 wireless siren each time. · When configure the wireless siren, you can only operation on the keypad of the alarm host. One siren can be studied to at most 10 wireless alarm hosts, multi wireless sirens are available to be added for each alarm host. |
Top saful is a large scale R&D and manufactory enterprise of video door phone, gsm alarm, Metal detector and other security products. Our goods have passed CE, FCC, Rohs, C-tick certifications. We can also do OEM/ODM as your designs too. Welcome to be our agents!