| Place of Origin: | China (Mainland) |
|---|---|
| Brand Name: | colo |
| Model Number: | colo-660T-06C |
| voltage: | 220V/110V |
| frequency: | 50HZ /60HZ |
| Powder: | 50W |
| mode: | COLO-660T-06C |
Quick Details
Specifications
bitty pulse powder spray gun
aluminum profiles pulse powder spray gun
Manual hopper feed unit
Digital display powder spray equipment
touch key
Suitable for heavy duty work
manual powder coating machine
this model is laboratory unit,the perfect solution for laboratory powder coating applications.Designed for short runs,with a 1L fluidizing powder hopper and is easyly cleaned between colors changes.
Pulse Powder coating system technology provides excellent transfer efficiencies, superior powder penetration, and a quality finish with no gun adjustments needed.
Powder feed system with air purge for faster, easier maintenance.
Modular hopper disconnects without tools.
1,Digital control system,display preset Voltage and currency at the same time.
2,Preset Voltage and currency be setted by knobs, easy to operate.
3,Alarm automatically if over the preset parameters
4,Adjust the outputstatic electricity automatically according the change of workpiece's size and distance
5,Could supply large amount powder under low pressure.
6,The inside circuit region is Independent sea, avoiding the powder incoming.
7,Good quality pressure gauge
8,Good quality dust-proof powder switch
9,Control the useless power strictly,low heating value,work continuously and steadily.
Electrical data
Mains input voltage: 220V/110V
Operating frequency:50HZ /60HZ
Powder:50W
Output voltage (to the gun):0-100KV ( adjustable)
Maximum output current (to the gun): 180UA(max)
Protection type:IP54
Approvals:CE Certification
Pneumatical data
Input pressure: min. 6 bar(87PSI)/max. 10 bar(145PSI)
Recommended input pressure: 7 bar(101.5PSI)
Max. water vapor content of the compressed
air 1.3 g/m3
Max. oil vapor content of the compressed air 0.1 mg/m3