rebar mesh welding machine/automatic reinforcing mesh welding machine

 

 

1.This machine adopts synchronous control technique, both the welding time and cent-control welding is supervised by IPC.

 

2. It adopts modularization design, so it is easy to improve the machine's function and feacure.

 

3. The line wires are fed automatically and continuously, so it saves much welding time to wait. The edges are regular and also could be adjustable. 

 

4. There is a big hopper for cross wires, it could contain one ton wires, it save much labor to add wires. Wire galling is also very precise.

 

5. It adopts servo motor to pull the mesh repeat, the mesh size are accurate and also could be adjustable.

 

6. Mesh pulling frame and cross wire falling part all could move to mesh pulling orientation, this could offer the space for orientation, increase the efficiency when adjust the mesh size.

 

 

7. The welding power is FM and timing motor, compared with abroad machine whose power is air pressured, this machine has such advantages: firm welding, little noise, high speed, smaller investment, lower maintenance.

 

 

Main technical parameters: 

 

Wire diameter	5.0-12mm	Line wire  form	pre-cut wire
Weft wire distance	50-300mm	Weft wire form	pre-cut wire
Line wire distance	100-300mm	Rated voltage	380V 50HZ
net width (customized)	2500mm	Rated power	125KVA X 12
Welding speed	50 times/min	Overall dimension	24 X 6.0 X   2.65M
line wire  No.	24	Max. mesh length	12000mm