| Input Voltage(V): | 110-220 |
|---|---|
| Lamp Power(W): | 1 |
| Lamp Luminous Flux(lm): | |
| Lamp Luminous Efficiency(lm/w): | |
| CRI (Ra>): | |
| Color Temperature(CCT): | Warm White |
| Working Temperature(℃): | |
| Working Lifetime(Hour): | |
| IP Rating: | IP33 |
| Certification: | CE,ROHS,SASO |
| Emitting Color: | Changeable |
| Base Type: | |
| Light Source: | |
| Place of Origin: | |
| Brand Name: | GAGA |
| Model Number: | GA-LS02 |
| keywords: | 1w animation laser light |
Quick Details
Specifications
Red< 1-1.8 Mrad ; Green <1.5 Mrad ; Blue <1.8 Mrad
Main benefits:
1: Three ways to control: Ethernet; DMX; Stand-alone
2: Possibility to add special board
with display: external ILDA,safety key support, X and Y invert intergrated
3: 40k maximal scan rate is good even for graphics shows.
4: Uses standard SD-card with size up to 32GB to store up to 254 complete laser
shows
5: You can use any SD-card reader to change the contents of card
6: You can store up to 20 hours of laser show on one SD-card
7: Laser safety- brightness map works also in DMX or Stand-alone mode
8: Color optimization-color balance and fade curves on SD-card (works in DMX or
Stand-alone mode)
9: Remotecontrol over ethernet or even Internet
(public IP address required)- upload frames and shows,configure stand-alone
mode,configure brightness map and color optimization
10: DMX512 output
Red laser wavelength: 637nm ; Power : 500mw
Green laser wavelength: 532nm; Power : 1000mw
Blue laser wavelength: 445nm; Power: 1000mw
laserwave diode Ang or TTL,30K modulation, with lasorb

