The CJV30-160 is a large format print and cut solution that combines fast printing and cutting with a high quality output.
Its unmatched performance and production make the CJV30-160 the optimum print & cut solution for signmakers and other print providers looking for an integrated printer/cutter to produce large sized signs, posters, vehicle wraps, POP displays, backlit, window decoration and floor signage.
Summary:

    High quality printing up to 1440 dpi
    Maximum printing speed 17.5 m2/h
    Automatic switching from printing to cutting
    Continuous crop mark detection for accurate contour cutting
    Simultaneous white and full colour printing
    Sparkling Metallic ink
    Continuous printing with the Uninterrupted Ink Supply System
    RIP, cutting, and creation software included

 
Mimaki CJV30-160 Printer/Cutter (63-inch)
Technical Specs & Details
Model     CJV30-160
Maximum printing width     1,610mm (63.3")
Print resolution     540dpi, 720dpi, 1440dpi
Print mode     540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
1,440 x 1,440dpi
Ink     Type     Solvent ink: ES3
Capacity     4-colour mode: 440cc cartridge x 2/colour = 880cc/ colour
6-colour mode: 440cc cartridge x 1/colour = 440cc/ colour
Media     Width     1,620mm (63.9")
Thickness     Less than 1.0mm
Roll weight     Less than 25kg (55lbs.)
Roll diameter     Inside: 2 inch, 3inch / Outside: Less than ? 180mm (7.1")
Maximun cutting speed     30cm 11.8"/s
Cutting force     10-350g
Applicable tools     Cutter, Water based ball-point pen, oil based ball-point pen
Media cutting     Cutting in the Y direction by the cutter on the head
Media heater     Pre / print / post heater
Media take-up device     Roll take-up device (Standard) inside, outside selectable
Command     MRL-III, MGL-IIc2
Interface     USB 2.0
Applicable standard     VCCI class A, FCC class A, UL60950, CE Marketing (EMC directive, low voltage directive) CB, report
Power     AC100~240V, less then 1,380VA
Operational Environment     20oC ~ 35oC (64~95oF), Humidity:35~65%RH (No condensation)
Dimentions     W=2,538mm (99.9") x
D=739mm (29.1") x
H=1,424mm (56.1")
Weight     160kg(353lbs.)

    Some of the samples in this website are artificial renderings.
    Specifications, design and dimensions stated in this website may be subject to change without prior notice(for technical improvements, etc).
    The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
    Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.