Application :

• -Used as signal and control cable for protected installations inside and outside of rail and transport vehicles, where space and weight are an important factor.
• -Used in cable harnesses, switchboards and control panels, driver desks etc.

Construction :

• Conductor	Tinned annealed copper wires as defined in EN 50306-2
  Insulation	LSZH special compound

• Electrical & Mechanical Properties :

  • Nominal Voltage	300/500 V
    Maximum Conductor Temperature	120°C /150°C (fixed installation)
    Minimum Permissible Ambient Temperature	-25/-40°C (fixed installation)
    Bending Radius	3 x Overall Diameter

  Chemical & Environmental Properties :

  • EN 60684-2	No fluorine
    EN 50305; EN 60811-2-1	Resistance to mineral oil & fuel oil, acid & alkali
    EN 50305	Resistance to ozone

  Fire Performance for rolling stock application :

  • EN 50306-2	Hazard levels HL1, HL2/HL3, HL4
    DIN 5510-2	Protection level 1/2/3/4
    BS 6853	Interior use 1a, 1b, II; Exterior use 1a, 1b, II
    NF F 16-101	F0

  Fire Performance for rolling stock application :

  • EN 50265-2-1; IEC 60332-1-2; NF C 32-070 2.1 (C2)	Vertical flame propogation for a single insulated wire or cable
    EN 50266-2-4 + EN 50305; IEC 60332-3-24; NF C 32-070 2.2 (C1); VDE 0472 Teil 804	Vertical flame spread of vertically mounted bunched wires or cables
    EN 50268-2; IEC 61034-2; NF C 32-073 ;  NF C 20-902; NF F 16 101; VDE 0472 Teil 816	Low Smoke Emission
    EN 50267-2-1; IEC 60754-1; NF C 32-074;  NF C 20-454; VDE 0472 Teil 815	Halogen Free
    EN 50267-2-2/3; IEC 60754-2; NF C 32-074; NF C 20-453; VDE 0472 Teil 813	Low Corrosivity (Acidity & Conductivity)
    EN 50305; NF X 70-100; NF F 63 808; TM1-04; BS6853	Low Toxicity
    NF F 63 808; BS6853; NF F 16 101	Smoke index