Cage welding machine for concrete pile
 

Useage

Pipe welding steel roll cage is reinforced ultra high strength concrete piles into the skeleton automatic roll welding special welding.

Widely used in pre-tensioned prestressed steel cage welded.

The machine has a small weldable reinforcement strength loss, without distorting long skeleton, skeleton produce good overall performance, facilitate a variety of adjustment, stable performance, easy operation and maintenance.

Future:

Steel frame welded seam welder mainly by the host material to relax rotating rack ring bars, steel skeleton traction mechanism, welding transformer and electrical control mechanism and other components.

The electrode arm rotating electrode connected to one end of the brush through the secondary conductive ring and welding transformer. Electrode arm can be adjusted according to the size of the diameter welded frame, the entire device is fixed in the rotating electrode welding agencies put a large roll. In the center of the rotating mechanism mounted fixed electrode wheels, and with the other end connected to the secondary winding of the welding transformer. Each electrode insulated from each other with the host.

Spin welding institutions set by the two big roll bearing fixed. Motor through V-belt wheel drive two sets of gear drag a large roll rotation. Intercropping in big roll while rotating ring material through the winding mold steel tendons around the longitudinal diameter bars. And by dividing the signal conduction welding transformer, be reinforced crosspoint powered welding, thereby simultaneously reinforced skeleton traction motor speed reduction device via drag chain drive the car to make the skeleton straight backward.

Welder welding and manual welding automatic welding two modes work can choose according to need.

technical parameters

welding diameter	Ф230 ~ Ф560 (produce pile diameter: 300,350,400,450,500,550,600)
welded steel length	3000-15000mm
longitudinal diameter	Ф7.1-Ф12.6mm
ring gauge diameter	Ф3-Ф6mm
ring diameter spacing	5-120mm
the drive motor power	wire around Y112M-4 4KW inverter
	Wire feed motor YLJ132-16-4
	Traction motor Y90S-4 1.5KW inverter
the welding transformer power	63KVA×2
welding transformer duty rate	50%
the host power supply	380V three-phase (two-phase transformer)
the welding speed	0-60r/min
the welding transformer	Self-cooling
Dimensions (L × W × H)	20000 × 2000 × 1645mm