Specification:

1. Meet SAE-AMS-DTL-23053/4
2. Adhesive-lined and flexible
3. Minimum Shrink Temperature:80℃
4. Minimum Recovery Temperature: 120℃
5. Standard Color: Black,

Special color: red, blue, white, yellow, clear (non flame retardant jacket)
Application:
   Manufactured by co-extrusion of polyolefin and hot-melt adhesive. Designed to provide both insulation and sealing. Used to protect auto wires, shipping cable, bundle wires and metal tubes against water and moisture.

Specificaion:

Normal size		As supplied(mm)	After recovered(mm)			Standard length(m)	Spool length(m)
(mm)	(inch)	Inside diameter(min.)	Inside diameter(min.)	Wall thickness(min.)	Adhesive thickness(mm)
BH-5(3X) 3:1 Adhesive-lined tubing
3/1	1/8	3	0.6	1.00±0.10	0.5	1.22	200
4.8/1.5	3/16	4.8	1.5	1.10±0.10	0.5	1.22	100
6/2	1/4	6	2	1.20±0.10	0.5	1.22	100
9/3	3/8	9	3	1.30±0.10	0.6	1.22	50
12/4	1/2	12	4	1.70±0.15	0.8	1.22	25
19/6	3/4	19	6	2.00±0.20	0.8	1.22	25
24/8	1	24	8	2.20±0.20	1.05	1.22	25
30/10	11/4	30	10	2.40±0.20	1.05	1.22	25
40/13	11/2	40	13	2.50±0.20	1.05	1.22	25
50/19	2	50	19	2.50±0.20	1.05	1.22	25
BH-5(4X) 4:1 Adhesive-lined tubing
1/4	3/16	4	1	1.00±0.10	0.5	1.22	100
6/1.27	1/4	6	1.27	1.20±0.10	0.6	1.22	100
8/1.65	5/16	8	1.65	1.55±0.10	0.75	1.22	50
12/2.41	1/2	12	2.41	1.95±0.15	1	1.22	25
16/4	5/8	16	4	2.10±0.15	1.05	1.22	25
18/4.45	3/4	18	4.45	2.40±0.20	1.2	1.22	25
24/6	1	24	6	2.50±0.20	1.25	1.22	25
32/8	11/4	32	8	2.50±0.20	1.25	1.22	25

Special size, cut pieces are available on request.

Technical Datas:

Property	Test Method	Typical Data
Tensile strength	ASTM D 2671	10.4MPa (min.)
Tensile strength after aging(158℃, 168hrs)	ASTM D 2671	Remains 70%
Elongation at break	ASTM D 2671	300% (min.)
Elongation at break after aging 158℃, 168hrs.	ASTM D 2671	100% (min.)
Longitudinal shrinkage	UL 224	0 to -10%
Heat shock	250℃, 4hrs.	No cracking, no dropping
Cold bend -30℃,1hr.	ASTM D 2671	No cracking
Voltage withstand AC 2500V, 60 seconds	ASTM D 2671	No breakdown
Volume resistance	ASTM D 876	1014Ω.cm(min.)
Flammability	SAE-AMS-DTL -23053/4	Self-extinguish in 30 sec.
Copper corrosion 158℃,168hrs.	UL 224	Pass
Water absorption	ASTM D 570	<0.5%