RAM Extruder for PTFE Rod(4-20mm)

this PTFE extruder is able to Extrude rod which dia from 4mm to 20mm. the automatic

Production line is controlled by computer, which is really easy to operate. Meanwhile, 

the Plastic extrusion machine is advance designed, high output, low energy consumption, 

Long-life, and also our professional engineer is available to offer overseas after sale service.

We can solve various problems to improve the equipment efficiency for you.

RAM extrusion machine for Teflon rod

the China vertical RAM Extruder is designed with 2 pressure plates, so the ream is affected

Via a slid pressure plate. the China rod RAM extruder is equipped with two hydraulic cylinders.

the main cylinder serves to move the RAM; the additional cylinder serves for retracting the 

Mandrel. Base plate and dosing tray are water-cooled.

the PTFE powder is feed into the rotating hopper via an exact working powder dosing device,

Controlled by a level indicator. by means of a rotating blade the powder is wiped uniformly into

the cavity of the mould.Range of diameter PTFE Extrusion 4 to 20 mm, Heating zones 4-6 

Zones.the complete electrical control is laterally fastened at Rod RAM extrusion. with a PC

Touch screen panel all speeds and temperatures can be programmed. Electronics contain

the necessary automatic controllers for speeds and temperatures. Five temperature regulators

Are contained in the plant, four for the extruding pipe and one automatic controller for a mandrel

Heating element. the maximum output speed of PTFE extrusion depends on: physical property, 

like Specific Gravity and Elongation, outside of PTFE rod diameters and PTFE product heating 

Length.PTFE Equipment Warranty: according to our standard terms: 12months

Technical Specification:

PTFE Rod Extruder Dia 4mm-20mm

Technical Data