1. In linear high power arc column, with strong Penetrability, less than 1.5mm of cutting seam, less than 0.2mm of heat affected zone
and minimal deformation to the cutting work piece, our rail cutting machine is highly efficient and can move and cut quickly. The cutting
speed can reach 2.8 m/min.
2. Heat affected zone to cutting work piece is less than 0.2mm, which will not lead to thermal deformation or change in material
microstructure.
3. Proprietary technology: model profiling is applied to the machine, which is suitable to the cutting of rail verge of any curve radius
without doing any harm to the base metal.
4. The main engine is computer programming-controlled. Arc ignition can be realized by putting the machine into uniform motion and the
machine can be stopped by arc extinction, which can avoid burn of the base metal.
5. The characteristics of Lightweight and easy to move about make it suitable for verge cutting of various rail tracks.

Product Specification/Models
Model:NLGK-80

Cutting power
Engine power(HP): 21 or 25
Auxiliary power:DC220V/3KW
Weight(kg):90

Air plasma cutting machine
Working voltage(V):110
Electric current range(A) :10-80
Cutting speed(m/min) 0.5-2.8
Cutting width(mm):1-15
Arc ignition mode:Non-contact arc ignition
Surface roughness:12.5
Continuous cutting distance: Long time continuous cutting
Weight(Kg):16

Air compressor 
Compressed air flow(L/min) 0.4 
Compressed air pressure:0.8
Weight(kg):56

Whole machine
Insulation resistance: >6
Undercarriage chassis weight(Kg):15
Total weight(Kg):182

Application
This railway cutter/trimmer is widely used to cut/trim the wasted edges of railway/railroad in Railway Working System.