Place of Origin: | China (Mainland) |
---|---|
Brand Name: | KED |
Model Number: | KED600 |
Quick Details
Specifications
KED 600 Batch PCBA cleaning machine combines cleaning, washing, and hot wind drying into one with high efficiency, multifunction and environmental protection functions. The cleaning principle is rotating spray pattern, which is the most widely used international precision electronic cleaning method. The main functions are cleaning pollution such as rosin, flux; solder paste and other organic/inorganic pollutants on the SMT/THT and PCBA board. All the cleaning effects can reach even exceed military and industry cleanliness testing standards. Because it has more reliable safety guarantee than ultrasonic equipments, it has been widely used in aerospace, aviation, ordnance industry, ordnance industry and precision medical instrument. For the current global cleaning equipment industry, the KED600 batch cleaning machine has the best cost performance. Its washing cleanliness, cleaning efficiency, the operation cost as well as after-sale service compasses other similar equipments.
Size and features
1 Size:
external dimension: L1200 × W1100 × H1830(mm)
Cleaning inner dimension : L690 × W620 × H715(mm) (the biggest clean inner size of batch cleaning machine of the world)
Cleaning basket size: L610 × W560 × H100(mm)
2 Technical Data:
Concentrated solvent tank capacity: 30L
Diluted solvent tank capacity: 60L
Spray tank capacity: 17L
Inner temperature compensation power: 6KW
Solvent trough's heater power: 9KW
Stoving heater power: 6KW
Cleaning pattern: 360°rotary cleaning
Cleaning time: 5~20min(Reference)
Rinsing Time: 1~2min
Drying Time: 20~30min(reference)
Resistivity measurement range :0~18MΩ
Liquid heating temperature: Room temperature~99℃
Drying Temperature: Room Temperature~99℃
Chemical liquid recovery and filtering: 0.45μm (Filter Small particles of pollutants such as solder paste, rosin, small particles of pollutants such as flux)
DI water discharging filter:0.45μm (Filter Small particles of pollutants such as solder paste, rosin, small particles of pollutants such as flux)
Water inlet: 1inch Fast junking connector
Water outfall: 1inch Fast junking connector 1
Diluents outfall : 1inch Fast junking connector 1(3/4inch in available machine)
Vertical spray pump: 3HP
Air outlet size: Φ100(W)×20mm(H)
Power supply/Air supply: AC380V 50HZ 65A / 0.45Mpa~0.7Mpa
Machine net weight: 600Kg
Cleaning process
Place PCBA board →set up parameter →Diluents warming →Pump Diluents to spraying
cabinet →Cleaning →Diluents
recovering →rinsing →hot air
drying
2~200pcs(According PCBA's area and height of components on the board
The method of placing PCBA
as the picture shows.
Equipment capacities