The machine used Omega combination of integrated valve in the machine, compact, less fault, synchronization system uses mechanical synchronization, synchronization better with stand partial load capability; significant number of fine-tuning, digital back gauge; upper die pad type deflection compensation device to resolve the problems brought about by the bending force plate deformation. The whole structure is advanced, superior performance, beautiful appearance. 
Specifications: (As per one set)
1 Normal pressure 1250KN 
2 Length of worktable 3200mm 
3 Distance between uprights 2600mm 
4 Throat depth 320mm 
5 Ram travel 120mm 
6 Max open height between working table surface and ram 380mm 
7 Adjustment to ram trap 80mm 
8 Speed of ram travel No load 80mm/s 
Full load 10mm/s 
return 70mm/s 
9 Gear pump type IGP4-H25R 
flow 25ml/r 
pressure 31.5Mpa 
10 Main motor type Y160M-4/B35 
power 7.5KW 
speed 950rpm 
11 Motor for adjusting ram type WPDS40/B14 
power 120W 
speed 1440rpm 
12 Motor for adjusting back 
type YU80M6B 
power 0.5KW 
speed 910rpm 
13 Overall dimension Length 3260mm 
width 1265mm 
height 2500mm
Main parts: 
1 Numerical display system ESTUN,Nanjing 
2 Oil cylinder seals VALQUA Japan/DZ Taiwan 
3 Main electric components Siemens 
4 Main hydraulic components OMEGA,USA 
5 Low noise internal gear pump Shanghai company 
6 The tubing joint sealing ring VALQUA Japan/DZ Taiwan 
7 Main Motor Nanjing named company 
8 With one set standard tool( up and down) 
9 With front support arms