Multi-point Electronic Inclinometer

HKCX-DZ Multi-points electronic inclinometer can not only measure the data of inclination, magnetic azimuth, tool face etc. of a certain section of the well path, but also can be used for measuring the data of a specific measuring point at the well bottom.

Application Scope

Suitable for the survey of the well path during drilling in oil, geologic, coal and water conservancy industries etc.

Product Features

Allow various measuring methods, wide adaptability: The probe-tube can be used for multi-point as well as fixed-point measurement. Equipped with different downhole protecting system, it is available for self-floating survey, suspending survey and dropping survey.

Available for high temperature measurement and deep well measurement: Assembled with the thermal insulation component, the instrument can accomplish the multi-point or fixed-point measurement under a highest working temperature of 260℃ and a highest working pressure of 220Mpa.

Low power consumption design, long working hours: With the low power consumption design, a fully charged battery can guarantee a continuous working for more than 50 hours.

The application software is universal and convenient for users: The software applies to timing type single point electronic inclinometer and fixed-point electronic inclinometer as well as multi-point electronic inclinometers. With a Windows interface, it is simple, clear, rapid and convenient.

Intelligent indication function: Whetherthe working state of the probe- tube is normal or not can be seen from the indicator light on the probe-tube panel.

Particular Power-off protection : It will not affect the instrument's normal work if there is a sudden outage caused by special strong vibration or impact.

Good resistance to impact and vibration: The instrument is radially and axially equipped with multistage buffering devices, such as rubber, springs, hydraulic anti-seismic shock absorber, which effectively improves the impact resistance as well as the vibration resistance of the instrument.

Technical Parameters

Item	Survey Range	Accuracy
Inclination	0～180°	±0.15°
Azimuth	0～360°	±1.2°(Inclination≥6°)
Gravity High-side	0～360°	±1.2°(Inclination≥6°)
Magnetic tool face	0～360°	±1.2°(Inclination≤8°)
Time-delay range	2~300min
Time-invertal range	12~3600s
Collecting points	3600 point
Working Temperature of Probe-tube	－40～125℃
Working Temperature of the whole instrument	Assembled with thermal insulation protecting component, the highest working temperature is 260℃.