Subminiature Diameter Multi-point Electronic Inclinometer

The diameter of the probe-tube is only 18mm, while the diameter of the standard external protecting barrel is only 25mm.

The diameter is only 35mm when equipped with thermal insulation external protecting barrel.

Improve hydrophthalmos area effectively. Prevent accidents and raise the passing ability.

HKCX-DZ Subminiature Diameter Multi-point Electronic Inclinometer is a requisite multi-point measuring instrument for small drilling tools in deep well.

Application Scope

Suitable for the survey of the well path during drilling in oil, geologic, coal and water conservancy industries etc.

Product Features

Suitable for the measurement in small but deep well with high temperature: The diameterof external protecting barrel is 25~45mm. The pressure bearing capacity is 100~220MPa (See details in table below).

Low power consumption design, long working hours: With the low power consumption design, a fully charged battery can guarantee a continuous working for more than 50 hours.

Intelligent indication function: Whetherthe working state of the probe- tube is normal or not can be seen from the indicator light on the probe-tube panel.

Particular Power-off protection : It will not affect the instrument's normal work if there is a sudden outage caused by special strong vibration or impact.

Technical Parameters

Item	Survey Range	Accuracy
Inclination	0～180°	±0.15°
Azimuth	0～360°	±1.2°(inclination≥6°)
Gravity High-side	0～360°	±1.2°(inclination≥6°)
Magnetic tool face	0～360°	±1.2°(inclination≤8°)
Time-delay range	2-300min
Time-invertal range	12-3600s
Collecting points	3600 points
Working Temperature of Probe-tube	－40~125℃

?                                    

Diameterof External Protecting Barrel	Maximum Pressure Bearing Capacity	Working Temperature of Instrument
25mm	100MPa	125℃
35mm	150MPa	260℃
45mm	220MPa	260℃