Woofer 2 x 10" (265 mm) front-firing drivers, magnetically shielded
Frequency Response 18-300 Hz ±3 dB (-3 dB free field)
19-300 Hz ±2 dB (pass band free field)
Noise < 20 dBA @ 10 cm
Output 40 Hz @ 95 dB SPL @ 1 m (sine wave output with < 0.5% THD)
SPL 116.7 dB (half space @ 3% THD)
112 dB (pink noise, half space @ 1 m)
(averaged between 40-90 Hz)
Amplifier Output 320 W continuous, 400 W peak (THD < 0.1%)
Controller Analog, active
Crossover Frequency 80 Hz
Slope 24 dB/oct
Equalization Low Cut: 30 Hz, 0 to -12 dB
Parametric: bypassable
Parametric Gain: +4 to -12 dB
Parametric Frequency: 20 to 120 Hz
Parametric Q: 1 to 8
Delay Flight Adjustment: 0 to 4.69 ms @ 80 Hz (4-step 0, 45, 90, 135) -180° switch
Volume Control Hardware remote or RS-232
Calibration Internal signal generator
Protection Peak and thermo limiters
Filter Infrasonic, 6.5Hz, 12 dB/oct
Remote Control CAT-5
Input/Output Signal 7.1/7+Sum
Impedance 13k ohms (XLR)
Input Sensitivity -8 and +6 dBu
Input Level +19 dBu (6.9 Vrms) per channel
CMRR > 60 dB @ 15 kHz
Isolation Interchannel: -95 dB, ±0.1 dB (1 kHz, level matching)
Control Range 118 dB, 0.25 dB resolution
Dynamic Range 110 dBA, < 0.001% THD+N @ -100 dB
LFE Gain Range Modes: 80 + re-routing, 80, 120, wide
Gain: 0/+10 dB
Gain Control +2 to -12 dB
Indicators Power On: Red LED
Limit/Clip: Red LED flashing
Bass Management Active: Green LED
Power Requirement 100-120 or 220-240 VAC, switchable
Power Consumption Idle: 30 W
Full Output: 550 W
Construction Wood cabinet with painted anthracite (RAL 7021) finish, rubber feet, and metal grille
Cabinet Volume Internal: 86 liters (net)
External: 156 liters
Dimensions (HxWxD) 28.9 x 13 x 25.4" (735 x 330 x 645 mm)
Weight 103.6 lbs (47.1 kg)