ⅠUse water to cool off the heat, do not need to assemble large area of cooling pin, assembly and usage is very convenient.

ⅡSmall Volume, large load power(is 4-8times to the product of no water cooling)

ⅢWe can do the type of no inductance of this kind. Use the code " N"
 

Notes:

1.       There is no special attention to the assembly of the resistor, and should be convenient to the connection with the water tap.

2.       The outer diameter of the water nozzle of the resistor is Φ12mm, the size of the water hose should be well matched with the water nozzle.

3.       The water flow used for the heat dissipation of the resistor should be more than 2L/min,hydraulic pressure should be in the range of 0.14Mpa—0.3Mpa, and had better assemble a water pressure gauge to control.

4.       Water for the heat dissipation should be city tap water, if underground water, water should be softening treatment.

5.       Before using the resistor, you should connect with water first.