Anti-jamming vehicle gps tracker with engine stop by WIRELESS relay

How it works?

The working principle of GPS TERMINATOR is simple as the normal one. The difference is it used RFID to control the relay. Don't need to cut off the car oil line and connect an external relay. The product consist of two parts, GPS Device and Wireless Relay (replace original car pump relay). When ACC turn on, gps device will give a command to the relay to switch on, then the car can start. Once the gps device has been removed, at the moment, gps device also give a command to relay to switch off, then the car will be stop after 10s to 12s buffer. Additional, the gps device is anti-jamming and can not decode.

This vehicle tracker is a remote vehicle positioning device consisting of a GPS module and a GSM/GPRS module, which is featured by compact size, good concealment and high precision. It can provide the GPS satellite positioning information, and can also provide the positioning information supported by the GSM base station if the GPS satellite information is unavailable, and the information about the latitude and longitude coordinates can be sent to the system platform and the preset mobile phone number. You can make use of these features to locate and manage your vehicle.

GPS Tracking Feature

Real-time locating and tracking

It can transmit the longitude and latitude coordinates by SMS or GPRS. If the devices get the GPS fix, the devices can send you real-time location; these devices can support Google map link, the devices will send the SMS with http link, click the link, the detailed position information will show on Google map directly. Smartphone would be better.

Monitoring function

The guardian uses a mobile phone to TEXT to the vehicle tracker. Upon receipt of the instruction, the vehicle tracker dials the number of the mobile phone which has sent the message instruction. After the call is connected, the vehicle tracker enters the monitoring mode.

Security function

If the ACC wire is connected to the ACC switch, this equipment will start the security function automatically in five minutes after the vehicle engine is turned off. If vehicle vibration occurs within one minute, the equipment will enter the security status with 1 minute delay, and will enter the security status unless no vehicle vibration occurs.

.

Vibration alarm

Under the security status (including the sleep status), if vehicle vibration occurs, this equipment immediately disconnects the relay and dials the mobile phone number of the vehicle owner to give an alarm; meanwhile, it wakes up the GPS positioning, and uploads the alarm and location data to the service platform

Wire cutting alarm

Under the security status, when the main power line of the vehicle tracker is disconnected, the vehicle tracker will send the wire cutting alarm message to the mobile phone number preset to receive the SOS message and uses the inner backup battery instead. The backup battery can work 7-10 hours. If the positive wire and negative wire of equipment are connected together after power line had been cut, the equipment still works normally.

SOS Button

Press the SOS button, the devices will send a help alert with locationo information to authorized mobile phone number, then dial the authorized number.

Oil/Electricity Cut-off function

This function is using for the vehicle owner to send a SMS remotely to stop a moving vehicle, also can send another instruction to recover the Oil / Electricity.

Geo-fence alarm

The devices will send the message with geo info to the authorized number when it breaches the district.

Low battery alarm

The devices will send an alert to the authorized phone number when it is low battery.