Product Description

Tungsten Carbide Nozzle Wire Guide Nozzle For Nittoku Winding Machine China Supplier (W0330-3-0807)


Description of motor coil winding nozzle:

Tungsten carbide wire guide nozzles(motor coil winding nozzles)used in coil winding machines to guide the wire to wind in the bobbin, pins and etc. For winding the stators and rotors in Series, cooling fans, micro-motor and the motor industries. This nozzle be fixed on coil winding machine to work with winder together.



Features of motor coil winding nozzle:

1. High Wear Resistance

This is assured by the choice of materials for wear elements possessing a minimum hardness in excess of Vickers 1, 000 (HRC 70).

2. Scratch-Proofing

Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 4 micro inches Ra or better, material permit.

3. Straightness and Stiffness

Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating ? . In plain terms, the wire should exit from the nozzle concentric to the locating ? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.

4. Precise Exit Radii

Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.



Specification of motor coil winding nozzle:

Measurements:

Make the nozzle according to user's dimensions drawing, Customize available by requested, outside diameter is governed by nozzle wall thickness. Confirm your nozzles measurements according to your winding machine and coil products.



******** Customize available by requested ********