Description:

• Energy Saving: It affects reaches 30%-70%, especially more for products needing long cycle time.
• High efficiency: Servo motor will improve the efficiency by 10% than that of the traditional one.
• Precision: Fast response. It takes only 0.03 seconds for the pressers and flow to go up. The machines have higher position accuracy (0.1mm) and responsibility than those of traditional machines.
• Saving: Without heat cased by overflow, the temperature of gas tank won't rise in run. Cooling water is saved.
• Low Noise: The noise is much lower than that of standard injection molding machine. It operates with low noise.
• Technical data:
• 
  

  INJECTION UNIT	Items	Unit	JK-100
  	Screw Diameter	mm	35	38	42
  	Screw L/D Ratio	L/D	21.7	20.0	18.1
  	Shot Size(Theoretical.)	cm3	159	187	228
  	Injection Weight	g	144	170	208
  	Injection Rate	cm3/s	89	105	128
  	Injection Pressure	Mpa	194	165	135
  	Injection Stroke	mm	165
  	Screw Speed	rpm	0~191
  CLAMPING UNIT	Clamping Force	KN	1000
  	Clamping Stroke	mm	320
  	Space Between Tie Bars	mm	360×360
  	Max.Mold Height	mm	350
  	Min.Mold Height	mm	100
  	Ejector Stroke/Force	mm /KN	100/38
  	No.of Ejector Pins	piece	5
  OTHERS	Max.Pump Pressure	Mpa	16
  	Pump Motor Power	KW	11.0
  	Heater Power	KW	7
  	Hopper Capacity	Kg	25
  	Oil Tank Capacity	L	180
  	Machine Dimension(L*W*H)	m	4.1×1.1×1.8
  	Machine Weight	T	3.5





Confsiguration list

 

E L E C T R I C	Controller	Taiwan. Techmation
	Transducer	DEPU Germany. DEPU
	Air Breaker	Japan. FUJI
	Contactor	Schneider or Siemens
	Thermal Overload Relay	Schneider or Siemens
	Limit Switches	Japan. Panasonic
H Y D R A U L I C	Oil seal	Valqua Japan
	Vane Pump	U.S.A. Vickers or Japan Yuken
	Directional Valve	Rexroth or Bosch
	PQ Valve	TAIWAN.HNC
	Plasticizing Hydraulic Motor	Intermit
	Orbital Hydraulic Motor	Eaton
ELECTRIC MOTOR		Beijing. Bijie Dongguan