1 De-coiler

1) Parameter: width of material: 120—1150mm thickness: 1—1.5mm;

2) Inner diameter of coil: φ508mm; inner expansion range: ф480-520 mm;

3) Outer max. diameter: φ1500mm; Max. loading: ≤10T

4) Motor power ;3.7kw frequency change control

5) Expansion type: hydraulic expansion

6) Press material type: pneumatic press material

7) Loading type: hydraulic trolley to feeding the raw material

8) Feeding speed: 0-20m/min, adjustable

 

3．2 Leveling machine

working roller: nine rollers type leveling machine

3．3  NCF1200 servo feeding machine

Function: material feeding

  Feature:  Uses the servo motor-driven .Multistage type feeding: May input 10 group of different feeding lengths. The liquid crystal touching screen demonstrated is advantageous for the change, establishes various technical parameters. The auto-induction start system and the punch press linkage (control punch press start).  

3．4 Punching press

1) Model of punching press:JF21-315B

2) Punching press: Uses the steel plate welding fuselage, the rigidity is strong with good appearance .Uses the combined type air operated friction clutch.

3．5 Forming machine

1) Forming station: 17sets

      2) Forming variety: bridge frame

  3) Material max. width:1150mm

4) Material max. thickness:≤1.5mm

5) The diameter of the roller axis: ￠90mm

6) Roll mould material: Gcr15,quenching treatment:HRC58-62°

7) Drive type: 22kw frequency conversion electromotor, ZQ400 Main speed  reducer . with autocephaly distribute gear case

3．6 Hydraulic cutting machine

1) Cutting type: hydraulic cutting

2) Blade type: close type die cavity cutter

3) Material of blade: Cr12, quench treatment, hardness HRC56-58

3．7 Run-out table

   Structure: roller type with no power