Products: 
      LXC7210 series power plant automation controllers for single diesel generator sets automation and control systems, signal control via remote power generators from the start and stop; uses 32 microprocessors and embedded real-time systems technology, automatic power-generating units / stop, precision measuring a variety of parameters, alarm protection and "three remote" feature. LCD graphics controller uses the big screen (240 * 128LCD) display, can display almost all important parameters in the next page, save the page. Can be set to Chinese, English, Spanish, Russian, all parameters can be adjusted from the control panel can also use the PC via USB, RS485 or GPRS remote adjustment and monitoring. Its compact structure, simple wiring, high reliability, and can be widely used in various types of generators automation systems, but also for the fire pump, air compressor automation control systems. 

Product performance and features: 
      1, using 32-bit ARM microcontrollers, hardware integration, high reliability has been further improved. 
      2, large LCD LCD is 240x128, with backlight, Chinese, English and other languages optional interface operation, all parameters can be set on the controller, easy commissioning test machine. 
      3, with advanced networking capabilities via GPRS mobile network and Internet connectivity, the network in any place can remote monitoring. 
      4, in particular to provide for the leasing industry management the perfect solution: leasing out via PC remote management unit, can monitor all operating parameters (oil pressure, water temperature, voltage, current, power, etc.), you can change the configuration at any time to protect the unit improperly applied, can record 200 detailed fault information, including: key parameters downtime reasons, when the voltage, current, power, oil pressure, water temperature, etc., and ready to be uploaded to the monitoring machine. Another multi-level password management to facilitate the lease term management. 
      5, with RS485 communication interface, using the MODBUS protocol can achieve "three remote" feature. 
      6, diesel or natural gas generator sets to achieve automatic start / stop, sub-gate (ATS switch) and perfect display fault protection and other functions; 
      7, LXC7220 for single generator set. 
 
Special Note: All parameters can be adjusted from the front panel of the controller. 
 
Specifications: 
       Operating voltage: DC8.0V to 35.0V continuous power supply 
       Total power consumption: <3W (standby mode: ≤2W) 
       Alternator Voltage Input: 20V AC - 360 V AC (ph-N) 3 Phase 4wire 
       Three-phase four-wire: 30V AC - 620 V AC (ph-ph) 3 Phase 3wire 
       Three-phase three-wire: 20V AC - 360 V AC (ph-N) 
       Single-phase two-wire: 20V AC - 360 V AC (ph-N) 
       Two-phase three-wire: 
       Alternator Frequency: 50 / 60Hz 
       Speed sensor voltage Vpp: 2.2 to 80V (peak to peak) 
       Speed sensor frequency: maximum 10000Hz 
       Start relay output: 16Amp controller supply voltage output 
       Fuel Relay Output: 16Amp controller supply voltage output 
       Programmable relay output 1: 7Amp 250VAC passive output 
       Programmable relay output 2: 7Amp 250VAC passive output 
       Programmable relay output 3: 16Amp 250VAC passive output 
       Programmable relay output 4: 16Amp 250VAC passive output 
       Programmable relay output 5: 7Amp controller supply voltage output (LXC7220) 
       Programmable relay output 6: 7Amp controller supply voltage output (LXC7220) 
       Dimensions: 210mm x 152 mm x 48 mm 
       Hole size: 186mm x 141mm 
       Current transformer secondary current: 5A Rated 
       Working conditions: Temperature: (-25 ~ + 70) ℃ Humidity: (20 ~ 90)% 
       Storage conditions: Temperature: (-40 ~ + 80) ℃ 
       Protection class: IP55: when waterproof rubber ring between the controller and the control panel. 
                        IP42: When there is no waterproof rubber ring between the controller and the control panel. 
       Dielectric strength: Object: in the input / output / power between 
                       Reference Standard: IEC688-1992 
                       Test methods: AC1.5kV / 1min leakage current 3mA 
       Weight: 0.68kg