DMHX  insulated conductors are designed in accordance to international safety regulations for a multitude of power supply applications.

The DMHX-L conductor rail system is a modern power supply system using single –pole insulated conductor rails.

It complies with the latest regulations and provides the electric energy for mobile consumers. The conductor rail is material copper (160A-2000A), aluminum (200A-2000A). The aluminum conductor rail is provided with a proven and patented stainless steel contact surface. Any numbers of poles can be installed vertically or horizontally, on straight or curved systems.

The conductor rail system can be installed indoor or outdoor. For high temperature conditions, a high temperature insulation cover up to +115°Cis available, also for low temperature conditions, it could be up to -40°C. The entire conductor rail system is insulated to current safety regulations, it is entirely protected against direct contact. Standard rail sections are 6 m long, shorter lengths to coincide with your runway requirements are available.

The finger are safe, protection code can up to IP23.

 Approved by ISO9001,CCC.

Curves

The insulated conductor rails could be bend in horizontal or vertical curves. The rails are depending on type and radius bend in factory or on site. Type-R: Curves for R>=1200mm.

 

Spare parts:

1).Joints

The connection between the conductor rails is made through bolted joints.

For touch protection every joint will be covered through a joint cap.

With bigger temperature fluctuation and length above 100 m are expansion sections required

2).End caps

The end caps are the touch proof end of the conductor rails.

3).Collectors

 The current collectors are made of carbon brush, re-inforced nylon and galvanized or spray-paint metal material Spring loaded carbon brushes maintain uniform contact , connecting cable and hinged or flexible towing arms included. Double collectors for transfer applications and higher amperage.

4).Expansion part

The expansion sections are required to compensate the different expansions between copper conductor and steel or concrete structures, in varying temperatures without interrupting electrical power.

Expansion joints are used when the powerail length between feeds, curves, switches or other fix points is exceeding 200m. Install one expansion joint according to accurate installation.

5).Isolating sections

Isolating sections are electrical interrupts of the conductor. Under normal operating conditions a cross over with collectors to switch the voltage off or on is only allowed with low power ratings(control current).

For control reasons, feed tracks, repair areas etc. we supply isolating sections.

6).Hangers

Standard brackets for conductor attachment to crane girders are available. conductor with sliding and fixpoint hangers. standard distance between suspension points for indoor and outdoor installation: 1200mm-2400mm.

7).copper-graphite contact shoe

 

Our advantages

 

1. 20 year manufacturing experience builds China No. 1 high quality conductor bar;

2. Introducing Germany advanced technology makes automatic production line;

3. We can make conductor bar according to customization from customers.

4. Our product sells all over China and abroad such as Indian, Indonesia and so on.