HKCX-DZ Fixed-point Electronic Inclinometer

-An ideal replacement for traditional timing type inclinometer

Start measuring as long as the instrument arrives at the well bottom, TIME SAVING & CONVENIENT!

HKCX-DZ Fixed-point Electronic Inclinometer has changed the traditional survey method of measuring after time fixed, and realized the new survey method of measuring without timing,whichprovides the users with the self-floating survey under screw drilling conditions in downhole. Besides, when the probe-tube is equipped with different downhole protecting system, it will be also available for suspending measuring and throwing measuring.

Application Scope

Suitable for the survey of the well path during drilling in oil, geologic, coal and water conservancy industries etc.

Product Features

No need timing, simple operating steps: Technicians no longer need to worry about how long the timing should be.

Avoid hurried operation: No hurried preparation work before the instrument down into the well.

No need to wait, start survey while arriving at the bottom: The instrument will start survey once it arrives at the well bottom.

Reliable and with high stability: It will avoid measurement failure caused by short timing.

Avoid washout, prolong life: There is no need to wait, so it reduces the mud flushing time to the carrier after it arrives at the well bottom.

Time-saving, cost-saving: This instrument can remarkablyreduce the survey time, which lowers a lot of drilling cost for the drilling crews.

Several ways to control the operation: The operation can be controlled by a controller or a computer.

Accurate response, screw measurement: When the instrument arrives at the measurement point, mark the transitory time from the rest of the drilling tools to the float-up time of the instrument after the pump stops, thus it will realize the accurate measurement under screw drilling condition.

Allow various measuring methods, wide adaptability: Equipped with different downhole protecting system, it is available for self-floating survey, suspending survey and dropping survey.

Available for high temperature measurement and deep well measurement: Assembled with the thermal insulation component, the highest working temperature will reach up to 260℃ and the highest working pressure will be 180Mpa.