Product Main

Quick Details

Place of Origin: China (Mainland)
Brand Name: HK High Technology
Model Number:

Specifications

 

Product Introduction

Multi-shot electronic inclinometer is for measuring the inclination, magnetic azimuth and tool face etc. of the measuring-point on the bottom of the well while drilling. It is also could be used for measuring the inclination and magnetic azimuth of certain section of the well trail.

Main Function

This 45mm High Temperature Multi-point Multi Shot Electronic Inclinometer (120MPa) is suitable for the measurement under such well condition: the minimum inner diameter of drilling tools should be at least 57mm. The maximum working temperature is 260 and the maximum working pressure is 120MPa.

 Product Advantages

1. High Measuring Accuracy, Stable and Reliable Performance: The key components of in the tube-- acceleration sensor ---is associated with the shock accelerometer, which has many advantages like high linearity, small temperature drift and good repeatability etc.

2. Unique Power-saving Function: The adoption of intermittent power supply can effectively save power. A fully charged battery barrel can guarantee a continuous work for more than 50 hours.

3. Special power-off protective function: Special strong vibration and shock caused by momentary power failure does not affect the normal working status of the instrument.

4. It can indicate whether the probe-tube is working normally or not.


5. Good Impact Resistance and Anti-vibration performance
: The instrument is equipped with the radial and axial configuration multistage rubber, springs, hydraulic shock buffer device, which effectively improve the impact resistance and anti-vibration capability of the instrument.

6. Can be Used for High Temperature and Deep Well Measurement: Equipped with heat insulation protection barrel assembly, the instrument can work under high temperatures of 260 for at least 6 hours with a maximum pressure bearing capability of 200MPa.

Indicators of Measurement Accuracy

 

Measurement Item

Measurement Scope

Measurement Accuracy

Inclination(Vertex)

0180°

±0.10°, ±0.15°

Magnetic Azimuth

0360°

±1.0, ±1.2°(Inclination≥6°)

Tool Face

Gravity high side

Magnetic Tool Face

±1.0, ±1.2°(Inclination≤8°)

Temperature

40125

±2

Other Technical Indicators

 

Item

Parameter

Delay time range

1299min

Interval Time Range (multi-shot mode)

63600seconds

The largest collection of points(multi-shot mode)

3600/7200points

Continuous working time(multi-shot mode)

≥80hours

Acquisition time by fixed-point way

59min