| Condition: | |
|---|---|
| Type: | |
| Computerized: | |
| Place of Origin: | China (Mainland) |
| Brand Name: | |
| Model Number: | |
| Voltage: | |
| Power(W): | |
| Dimension(L*W*H): | |
| Weight: | |
| Certification: | |
| Warranty: | |
| After-sales Service Provided: |
Quick Details
Specifications
With the purchase of ABM Mobile Factories, you will be able to:
1. Start a very profitable business in steel construction.
2. Build steel buildings for your own use or for other customers for unlimited applications at a very high speed, at nearly half the cost of conventional buildings.
The ABM Mobile Factory is taken to the construction site and a team of 10 to 12 workers will be able fabricate right on the site 30 to 60 cm wide arches from high quality galvanized and pre-painted steel coils at a very high speed. These arches are seamed together by a motorized seamer into totally waterproof building with span of up to 30 meters width without any intermediate support. The ABM arches seamed together are used either as a complete building or a roof over conventional walls.
With ABM MOBILE FACTORIES, a one thousand square meter building can be fabricated on-site and erected in one day at less than half the cost of conventional buildings.
POLYURETHANE FOAM INJECTING MACHINE
High-pressure Polyurethane Spray and Perfusion Equipment
With the knowing of many kinds of materials, people have a great demand of the polyurethane molding equipment of which the amount of material can be regulated according to the material requirements.
Our polyurethane molding equipment has a molding system making the various proportions. The ratio between material A and B is from 1:1~1:2.
It has a cylinder of which diameter is 125mm for drive and two link rods to drive two material pumps having a stroke campaign. Each of the link rods has scale positioning holes, to lengthen or shorten the travel of the material pumps.
With adjusting the fixing positions of material A&B pumps, it can be chosen any proportion within the ratio it allows.
Standard Configuration
Mainframe: 1 set
Spray gun: 1 set
Heating and preserved pipe: 15m
Connecting pipe for spray gun: 1.5m
Transfer pump: 2 sets
Technical Parameter:
Electrical source: 220v 7000w
Air source: 0.5~0.8Mpa(70~120psi) > 0.9m3/min
Output: 2~6.8kg/min
Heating device power for material: 2500w x2
Heating power for pipe heating: 2000w
Single component output pressure: 5~10Mpa (700~1500psi)
The range of the ratio: 1:1~2:1
Shipping Parameter:
Volume: 800x700x1100(mm)
Weight: 200kg
HIGH PRESSURE POLYURETHANE FOAM INJECTING MACHINE
I Machine Code: SM220
II Description of the machine
This injecting machine is mainly used for continuous injecting rigid or soft polyurethane foam products such as sofa pillow, car seats and furniture, etc.
This machine is controlled by PLC, high accuracy, simple operation, convenient maintenance. When pre-set first injection is finished, the alarming relay will give alarms.
III Main technical data
3.1 Main pump motor power: 15kW x 2
3.2 Mixing motor power: 0.55kW (installed inside A tank)
3.3 Hydraulic pump motor power: 2.2kW
3.4 Flux: 40-400kg per minute
3.5 Injecting time: 0.1-99.9s
3.6 Injecting pipe high pressure protected by pressure gauge with electric contact
3.7 Filters for Polyol and ISO glues: DN110 self-clean filter
3.8 Hydraulic station: hydraulic tank 20L, integrated with over-flow valve, safety valve, pressure gauge, discharge valve, electromagnetic valve, anti-shock pressure gauge, etc.
3.9 High pressure mixing head: developed by ourselves, high precision, hydraulic control, L type, self-clean, solvent free, life is more than 300 thousand times (if more than 300 thousand times, this head can be repaired and used again); Outer diameter of the nozzle: 24mm.
3.10 Temperature control system for tanks: the two tanks are heated by waters in the interlayer of the tanks; Equipped with two 2kW heaters; Electronic numeric displayer temperature controller is equipped to keep invariable temperature needed for glues.
3.11 Pressure pipes are chosen from Chinese domestic qualified supplier.
3.12 Auto-filling devices for two tanks: two self-absorbing pumps, motor power 1.5kW each.
3.13 Capacity of the tanks for polyurethane glue: 180 kg each
3.14 PLC automatic control: PLC programmable; Special PLC system from Chinese domestic which can save 99 programs.
3.15 Equipped piston type counting pump: adjusting accuracy 0.05%.
3.16 Generating pressure: 80-100MPa
3.17 Suspending arm length 2.5m, rotated in 270 degree, horizontal injecting or vertical injecting.
3.18 Dimension:
Main body: about 1590 x 1200 x 2400mm
Tanks: 720 x 1550 x 2400mm
3.19 Weight: about 2500kg