POLYURETHANE FOAM INJECTING MACHINE

 

High-pressure Polyurethane Spray and Perfusion Equipment

With the knowing of many kinds of materials, people have a great demand of the polyurethane molding equipment of which the amount of material can be regulated according to the material requirements.

Our polyurethane molding equipment has a molding system making the various proportions. The ratio between material A and B is from 1:1~1:2.

It has a cylinder of which diameter is 125mm for drive and two link rods to drive two material pumps having a stroke campaign. Each of the link rods has scale positioning holes, to lengthen or shorten the travel of the material pumps.

With adjusting the fixing positions of material A&B pumps, it can be chosen any proportion within the ratio it allows.

Standard Configuration

Mainframe: 1 set

Spray gun: 1 set

Heating and preserved pipe: 15m

Connecting pipe for spray gun: 1.5m

Transfer pump: 2 sets

Technical Parameter:

Electrical source: 220v 7000w

Air source: 0.5~0.8Mpa(70~120psi) > 0.9m³/min

Output: 2~6.8kg/min

Heating device power for material: 2500w x2

Heating power for pipe heating: 2000w

Single component output pressure: 5~10Mpa (700~1500psi)

The range of the ratio: 1:1~2:1

Shipping Parameter:

Volume: 800x700x1100(mm)

Weight: 200kg