Feed Size: 50 - 100 mm

Processing Capacity: 5 - 100 t/h

Processible Materials: Iron ore, coal, clinker, limestone, dolomite, flint clay, lead zinc ore, serpentine, blast furnace slag, gangue and phosphate ore.

Application Range: Construction material industry, mining, metallurgy, chemical engineering, etc.

Compound Crusher Introduction:

Compound crusher, also known as vertical compound crusher, compound stone crusher and stone compound crusher, is adjustable fine crushing machine without grate bar which is widely used for the fine crushing of raw materials and clinker in cement plant.; at the same time, it can also be used for the fine crushing of materials with medium hardness such as dolomite, flint clay, lead-zinc ore, serpentine, blast furnace slag, coal gangue and phosphate rock and it is especially suitable for artificial sand making with hard limestone, dolomite, granite and basalt or for processing stone materials used for highway pavement.

The combination crusher can crush large materials with high moisture content, so it's the ideal machine in sand production line and stone crushing line. The vertical crusher adopts the no-grizzly-bar structure to avoid blocking. Materials that can't be crushed will be discharged from the crusher without causing damage to the machine. The compound crusher can directly crush materials with medium hardness such as iron ore, sandstone, gypsum, blast furnace slag, coal, etc.

Compound Crusher Features:

1. Simple and reasonable structure, low running costs, large crushing rate, energy saving.

2. The impact crusher is with functions of fine crushing and coarse grinding.

3. Moisture content of raw material has little impact on the crushing efficiency of combination crusher.

4. Noise below 75 decibels (db level), less dust pollution.

5. Suitable for crushing medium-hard and extra-hard materials.

6. Little lining wear, easy maintenance.

Compound Crusher Working Principle:

Materials fall into the high speed spinning impeller from the top of the machine, and get crashed and crushed at high speed with the other materials spreading around the impeller in an umbrella shape under the high speed centrifugal action. After materials hit each other, they get further crashing, grinding and crushing in eddy current between the impeller and the chassis. Then they are discharged from the bottom barrel, forming multiple closed circuit recycling process. The finished product particle size is controlled by the screening machine.

Model		800	1000	1250	1500	1750
Rotor diameter (mm)		650	800	1000	1250	1560
Cylinder height(mm)		800	850	850	1000	1410
Main shaft rotation speed (r/min)		1350	970	740	650	600
Feeding size(mm)		50	70	100	100	100
Discharging size (mm)		0-5	0-5	0-5	0-5	0-5
Processing capacity (t/h)		5-15	10-30	20-60	30-80	40-100
Motor	Power(kw)	30	55	75	110	132
	Rotation speed	1440	1440	750	750	750
Dimensions(L×W×H)(mm)		2200×860×1980	2700×1160×2000	2800×1400×2730	3100×1900×2300	3350×2100×2800
Total weight (t)		2.3	4.5	9.73	18.1	26.61