Gas-Liquid Booster Press Machine
Non-standard plan can be customized according to customer's demand
FBY-Z01
1.The-C-body design, use small space and easy to operate.
2.Using the Principle of supercharger,get high speed and large output forces.
3.No hydraulic system noise,can save electricity consumption and thus reduce production costs.
4.Output adjustment as easy as adjusting the air pressure,can achieve the required pressure.
5.Safety design,using both hands to operate,with emergency stop and jog up and down function.
6.Key and foot Switch two cycle start modes.Pressure Speed can be adjusted.
7.Widely used in parts of the press forming, stretching,bending,punching, stamping, shaft alignment and press-fit etc.
Technical parameters
Specification
max opening height 220mm
total stroke 135mm
pressure stroke 15mm
the size of the working table 280*240mm
pressure 0.4-0.7mpa
mold mouting hole 25mm
power AC220V,50Hz V
using pressure  theory pressure
0.4 mpa              6.88kn(112kgf)
0.5mpa               8.75kn(140kgf)
0.6mpa               10.17kn(168kgf)
0.7mpa               11.82kn(196kgf)