| Model Number: | LVB01A |
|---|---|
| Brand Name: | LongView |
| Place of Origin: | China (Mainland) |
Quick Details
Specifications
2014 New Portable Bluetooth 1D 2D
Barcode+HF+UHF RFID Scanner and Reader
Introduction:
World's First Portable Combined Multifunctional Back Clip
Advantages:
HF/UHF RFID
1D/2D Barcode
Multifunctional Design
Power Bank
Bluetooth Communication
Dust and Water Proof
Long Lifetime & Low Upgrading Cost
Scan Button in Both Sides
Various Reading Prompt Mode
Fit for All Phones
With Adjustable Snaps
IP 54, Dust Proof and Long Duration
Specification:
charging and discharging parameter
Input
5.0±0.25V DC
output
5.0±0.25V DC
nominal capacity
3000mAhlithium polymer battery (>500 charge cycles)
Standard Charge Circuit
<1A
Standard Charging method
CV(constant voltage5.0V)charging
charging time
≤6 hours
max charging current
<1A
max discharge current
<1A
end-off voltage
3.3V
Interface
Bluetooth HID & SPP
1D Infrared
Reading Mode
CCD
Resolution
2500
Scan Rate
300 scan/sec
Symbologies
Code128, EAN-13, EAN-8, Code39, UPC-A, UPC-E, Codabar, Interleaved 2 of 5, ISBN/ISSN, Code 93, UCC/EAN-128, GS1 Databar,ITF-14
Precision
≥ 5mil(under the condition of PCS: 0.9, Code 39)
Scan Distance
Code128(10mil):30mm-285mm; Code39(5mil):90mm-195mm; Code39(10mil):50mm-325mm; EAN-13(10mil):60mm-265mm; EAN-13(15mil):65mm-350mm;
sensitivity
incline
±65°@ 0°Roll and 0° Skew
rotate
±30°@ 0°Pitch and 0°Skew
declination
±60°@ 0°Roll and 0° Pitch
outdoor scanning
proprietary technology-- able to read the code bar under sun light
current
maximum current
100mA
standby current
45mA
RFID(optional)
Frequency
13.56MHz
Reading Mode
reading-writing or auto-induction just for Reading
Supported Standards
ISO14443A
Working distance
>30mm
working current
<100mA
Max Power Dissipation
0.33W
Environment
Operating temperature
0℃~45℃
Storage Temperature
-10℃~ +45℃
Humidity
5% - 95% ( Non-condensing )
Clip
LED display
4LED to show charging and discharging active status and electrical quantity:2LED show the working mode of Bar codes and Bluetooth working mode
Auto charging
Automatically charging without pressing any key when inserting into the interface by USB cable.
Auto Detect
Automatically detect whether to charge when inserting into the interface by USB cable.
priority of charge
Priority of charging mobile phone, then charging the internal battery.
UPS function
When external power supply breaks off, its internal battery with keep charging mobile phone.
battery overcharge protection
Dual hardware protection: >4.2±0.04V
Battery over discharge alarm voltage
HW: 2.8±0.1V & SW: <3.3V; Priority to enable software protection
Output Current Limiting Threshold
≤ 1.2A
short-circuit protection
HW protection
Standard Configuration
Micro USB Cable
Left and right buckle
front buckle (two pieces with different height)
skid and scratch resistant cloth 2pcs
Warranty Card
Certification
Instruction Book
Options
5V/2A & 5V/1A two separate output high-quality car charger (use cell phone charger for both mobile phone and back splint when indoor, and use car charger when outdoor. The car charger can also charges tablet PC.
Sling
AC charger
Cross Screwdriver
pocket