Mute the Microseismicity Hydraulic Punching Machine
Non-standard plan can be customized according to customer's demand
FBY-H25
Product feature
1.C-type single-column design,machine tool bed HT300 casting,after high temperature aging treatment,good rigidity,a small amount of deformation.
2.Professional design,suitable for a variety of sheet punching,molding,stretch,shear machining,bending,stamping,riveting and other processing.
3.Punch in the work cycle,according to the technological requirements can be variable speed,quiet stamping,micro-vibration,For stamping operations on the floors.
4.The opening height is large,the stroke is adjustable,particularly suitable for deep-barrel products punching, molding.
5.The hydraulic system uses a rapid transformation principle,movement speed,high efficiency,energy saving and environmental protection.
6.Punch down,with two speeds,fast-forward and slow forward,fast forward speed is fast and can improve work efficiency;Slow forward speed can be adjusted,to improve the quality of press-fit,protection of mold and products.
7.Security design,using both hands to operate, with emergency stop and jog up and down function.
8.Two of the cycle start-up mode:buttons and pedals.
9.The seal is NOK from Japan and Taiwan tripod base,hydraulic fittings using brand-name products of taiwan.
10.Infrared protection device(according to customer's requirements)
Technical parameter
Specification
theoretical output pressure 250(25T)kn
rated oil pressure 15mpa
max stroke 230mm
daylight opening height 400mm
throat depth 210mm
down speed 200mm/s
pressing speed 10-30mm/s
return speed 120mm/s
the size of the bed 440*500mm
the height of the bed 680mm
motor power 5.5kw
power 380v
weight 1500kgs
fuel tank capacity 85L