1.Desciption

Spiral Separator is a new equipment represents the domestic advanced level, successfully invented by Beijing General Research Institute of Mining and Metallurgy.  

Spiral separators are made of high quality polyurethane with fiberglass banking and wearable corundum inner surface. Generally there are 5 turns in one start and four starts in one column. They can be used for mineral particle sized from 0.02 to 0.3 mm, with processing capacity from 2 to 4 t/h per column. 4 or 6 columns can be joined to form a bank with distributor on the top to suit capacity requirements. 

The advantages are small footprint, without power, moisture proof, anti-rust, wear proof, anti-corrosion and no noise, properly suitable for the different feeding particle sizes. It is especially for concentrating sand ore in beach, riverside, seashore and stream.

2.Features

1. Reasonable structure and small occupation area.

2. High recovery, high efficiency, and precise separation.

3. Light in weight, rust and corrosion resistant.

4. Simple installation and Minimal maintenance requirements.

5. Low operating cost and long operating life.

6. Reliable running with minimal operator attention.

7. Strong adaptability to fluctuation of feeding amount, density, size and grade.

3.Working principle

Spiral Chute is working under the the force of water flow, gravity, inertial centrifuge and friction. Slurry is pumped to the top of the spiral , and it enters a feed distributor that evenly distributes the feed to each spiral concentrator. The design and shape of the spiral make it work, when combined with gravitational acceleration. As the slurry travels the spiraling path down the spiral, mineral grains settle and start sorting according to size, density and to a lesser extend shape. Low density particles are carried with the bulk of the water towards the outside of the spiral , while particles with the greatest density migrate towards the inside of the spiral.

4.Application

It is applicable for separation of granularity ranged from 4mm to 0.02mm metallic minerals such as iron, ilmenite, chromite, tungsten-tin ore, niobium-tantalum ore, gold placer, seashore monazite, rutile and zircon as well as other metallic and non-metallic minerals with adequate difference of specific gravity. For the seaside, riverside, sand beach, the stream of placer mining, it is the best equipment of all.

5.FAQ

1. What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.

 

* What minerals are you separating?

* What's the maximum size of your raw minerals?

* How much capacity do you need per hour for your project?

 

Note: If Pics of the mineral & Chemical components report of your minerals are available, pls consider to send us for evaluation purposes.

 

2. Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?

 

Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.

 

3. Can we vist your company?

 

Yes, our company warmly welcome clients to visit our company at anytime. we will prepare the VISA for you, and arrange hotel, traffic, translator in order to let you stay comfortable while you are visiting us. Moreover, during the visiting, you can check our factory and machinery, and take tour to some of the nearby mining project build by our company. Also, we can throughly discuss your project in order to build a flawless project in the future.

 

4. How long is the warrenty of your equipments? Does your company supply the spare parts?

 

The warranty period of SENTA equipments is one year. And of course we will supply te spare parts for you for life-long time at lowest cost.

 

5. If i need the complete mineral processing line. is SENTA able to help us build it?

 

Yes,  we can help you combine a complete mineral processing line. and give you related professional advices as long as you need. we had already build many mining projects in China & Overseas. SENTA can set a complete processing line just as you require, the main equipments will be manufactured by us and some other supporting equipments ( like generator ) will be supplied by our cooperating facotries under our supervision.