Centrifugal Concentrator is a kind of centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing the amalgamation. It is also used to recover gold from the gold tailings.
Five STLB series of models are available. Application shows that the recovery rate can be as high as 90%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of 0.074mm, the recovery for the natural gold is expected up to 98%, For that natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1,000 times. This equipment is patented in China.
2.Features

High recovery rate: Through our test, the recovery rate for placer gold can be 98% or more, for rock gold, the recovery rate could reach 97% when the feeding size is below 0.04mm.

High efficiency: Centrifugal concentrator has a capacity of 10-20TPH, and STLB100 centrifugal concentrator has a capacity of 50-80TPH. Only one machine could give you such a high capacity and high recovery rate. It's the most efficient concentration equipment in our factory.

Easy to install: Only a small leveled place required. It's a complete machine, before starting it, only need to connect the fluidization water and power.

Easy to adjust: There are only 2 factors that will affect the recovery result, they are water pressure and feeding size. By giving proper water pressure and feeding size, you could get the best recovery effect.

Easy to operate: After finishing the water pressure and feeding size adjust, what U have to do is to fetch the concentrates every 2-4 hours. (Depending on the grade of the mine)

No pollution: This machine only consumes water and electric power, and exhaust tailings and water. Low noise, no chemical agent involved.

Reliable: The centrifugal concentrator gets a simple & tough structure, the main body is made by strong steel, and the concentrate cone is made by stainless steel. And the bearing is greased to keep it running well.

Centrifugal Concentrator is the kind of centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. As well as used to recover gold from the old tailings too.
Since 1985, this machine was invented, the technology of the centrifugal concentrator have been greatly evolved. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of—0.074mm, the recovery for the natural gold is expected up to 98%. For that natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours. And the upgrade ratio is up to 1,000 times.
4.FAQ

1. What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.

* What minerals are you separating?

* What's the maximum size of your raw minerals?

* How much capacity do you need per hour for your project?

Note: If Pics of the mineral & Chemical components report of your minerals are available, pls consider to send us for evaluation purposes.

2. Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?

Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.

3. Can we vist your company?

Yes, our company warmly welcome clients to visit our company at anytime. we will prepare the VISA for you, and arrange hotel, traffic, translator in order to let you stay comfortable while you are visiting us. Moreover, during the visiting, you can check our factory and machinery, and take tour to some of the nearby mining project build by our company. Also, we can throughly discuss your project in order to build a flawless project in the future.

4. How long is the warrenty of your equipments? Does your company supply the spare parts?

The warranty period of SENTA equipments is one year. And of course we will supply te spare parts for you for life-long time at lowest cost.

5. If i need the complete mineral processing line. is SENTA able to help us build it?

Yes,  we can help you combine a complete mineral processing line. and give you related professional advices as long as you need. we had already build many mining projects in China & Overseas. SENTA can set a complete processing line just as you require, the main equipments will be manufactured by us and some other supporting equipments ( like generator ) will be supplied by our cooperating facotries under our supervision.