Minipore high performance pure polypropylene depth dual-gradient density filter media is under highly controlled manufacturing process which guarantees consistently reproducible filter performance. PM-series filters are comprised of an inner compact rated section for exceptional dirt-holding capability and the outstanding performance which meets the highest quality requirements are selected for critical filtration application.
PM-Series cartridge is able to retain contaminants throughout the entire cross section of the filter. The density increases progressively from the exterior surface to the interior and "graded density" allows larger particles to be trapped near the surface while smaller particles penetrate the larger open areas to be trapped nearer the center of the filter in the smaller openings.

Applications

? Drinking water treatment
? Pre-filtration for RO+DI
? Food and beverage
? Plating, Chemicals and Solvents

 

Specifications

? Material : 100% PP microfiber
? Micron rating: 1, 3, 5, 10, ... 100um
? OD. 62-65mm/110-115mm; ID. 28mm
? Length: 5", 10", 20", 30", 40", 50", 60"

Operating Conditions

? Maximum differential pressure: 4.1bar at 20℃; 2.1bar at 60℃; 1.1bar at 80℃
? Recommended change out: 2.0bar
? Maximum temperature: 80℃

Dual-Gradient Density Media Rating (um)

Nominal Micron Rating (um)	1	3	5	10	25	50
Outer Pre-Filter Media (um)	25	25	50	50	75	100
Inner Compact Media (um)	1	3	5	10	25	50

Dirt Holding Capacity

Micron Rating(μm)	1	3	5	10	25	50
Dirt Holding Capacity(Gram/10"L)	>15	>20	>30	>60	>120	>150