| Place of Origin: | |
|---|---|
| Brand Name: | LONGS |
| Model Number: | DM542A |
| Certification: | CCC,CE,ROHS |
| Type: | STEPPER MOTOR DRIVER |
| Protect Feature: | |
| Output Power: | |
| Voltage(V): | |
| Efficiency: |
Quick Details
Specifications
DM542A is a type of
two-phase hybrid stepping motor driver, The drive voltage of which is from 18VDC
to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds
with 42mm to 86mm outside diameter and less than 4.0A phase current. This
circuit that it adopts is similar to the circuit of servo control which enables
the motor run smoothly almost without noise and vibration. Hording torque when
DM542A run under high speed is also significantly higher than the other
two-phase driver, what's more, the positioning accuracy is also higher. It is
widely used in middle and big size numerical control devices such as curving
machine, CNC machine, and computer embroider machine, packing machines and so
on.
Features:
lHigh performance, low price
lAverage current control, 2-phase sinusoidal output current drive
lSupply voltage from 18VDC to 50VDC
lOpto-isolated signal I/O
lOvervoltage, under voltage, overcorrect, phase short circuit protection
l15 channels subdivision and automatic idle-current reduction
l8 channels output phase current setting
lOffline command input terminal
lMotor torque is related with speed, but not related with step/revolution
lHigh start speed
lHigh hording torque under high speed
Electrical specification:
|
Input voltage |
18-50VDC |
|
Input current |
＜ 4A |
|
Output current |
1.0A～4.2A |
|
Consumption |
Consumption: 80W; Internal Insurance: 6A |
|
Temperature |
Working Temperature -10～45℃; Stocking temperature -40℃～70℃ |
|
Humidity |
Not condensation, no water droplets |
|
gas |
Prohibition of combustible gases and conductive dust |
|
weight |
200G |
Pins assignments and description:
1)Connector Pins Configurations
|
Pin Function |
Details |
|
PUL +,PUL- |
Pulse signal, PUL+ is the positive end of pulses input pin PUL- is the negative end of pulse input pin |
|
DIR+,DIR- |
DIR signal: DIR+ is the positive end of direction input pin DIR- is the negative end of direction input pin |
|
ENBL+ |
Enable signal: ENBL+ is the positive end of direction input pin. This signal is used for enabling/disabling the driver. High level for enabling the driver and low level for disabling the driver. |
|
ENBL- |
ENBL- is the negative end of direction input pin. Usually left unconnected (enabled) |