1.maintenance .

(A).Car radiator as automobile internal heat transfer of thermal conductivity of parts, play an important role for the car, car radiator main materials for aluminum or copper, radiator core is its main part, equipped with coolant, popular, car radiator is a heat exchanger.For maintenance and repair of radiator, most have only a sketchy knowledge owners, here I'd like to introduce the maintenance and repair of dailycar radiator.

(B).Car radiator Radiator and water tank as auto radiator, in terms of its material, is the metal corrosion, so should avoid its and acid and alkali corrosive solution contact, in order to avoid damage.For auto radiator, jam is a very common fault, breaks the happening of congestion, the inside should be injected into soft water, hard water to soften again after injection, lest produce scale blockage of car radiator.Winter cold weather, the radiator to ice freezing, so should add antifreeze, avoid water ice.Should always check the water level in the day-to-day use, to cool down after adding water.To add water when the car radiator, radiator cap should be slowly opened, owners and other homework personnel should as far as possible away from the body filler, so as to avoid high pressure caused by high temperature gas jet outlet personnel burns.

 

2..Car radiator failure matters needing attention.
The radiator in the car has an important role in cooling, heat dissipation.Continuous high temperature in summer, the car radiator especially prone to a few glitches, water shortage, water tank corrosion, leakage, etc will directly cause the "boiled", is the water tank temperature reaches the boiling point.Bad engine cooling, the temperature is too high, parts expansion can make the parts fit clearance is reduced, on the other hand the temperature too high oil viscosity is reduced, in this case, the parts wear.If you don't immediately make appropriate processing, the engine is likely to damage cause serious machine damage accident.

 

Fault judgment:
When the vehicle is in the process of the engine bonnet suddenly white water vapor, or the water table pointer rapid temperature rise to "H" mark position, it indicates that the engine temperature is too high.Often due to water shortage, water in the tank or water tank caused fan is not running.A real-time processing
Step 1: find a safe place to stop immediately, but don't shut down immediately.To keep the engine idle idle continue to heat dissipation, at the same time open the engine cover increase the cooling speed.
Note: under the condition of the water temperature is too high even bring:
2, don't try to open the tank cover, or is likely to have a hot liquid fires cause burns.
3, don't to the engine cylinder block, cylinder head nature, is likely to cause cylinder due to quenching cracking.
Step 2: after a period of time, check leakage under the car.
Step 3: wait until the water temperature table pointer to a warm place, switch off the engine.
Step 4: use a wet towel to package the tank cover, slowly open the first switch (about 1/4 turn), after waiting for vapor pressure release to end, to fully open the tank cover, check the amount of water in water tank and water quality, as well as the fan belt whether there are abnormal.If water shortage, it should be slowly adding water to the highest near the line.
Note: if the tank is leaking or fan belt loose, broken damage situation, called traction company can wait for the trailer.When necessary, also can wait after engine cooling completely, will be in the form of low speed driving my car to the service factory maintenance.Remember, not in a normal speed driving, otherwise is likely to cause permanent damage to the engine.1, do not attempt to continue driving, lest cause machine damage accident.

 3.FAQ.

   

Q1: What's your terms of payment?
A: T/T, 30% deposit before production, the balance before shipment.Western union.Paypal.
Q2: What's your MOQ?
A: Our MOQ is 20PCS, we can also send same sample for your checking first before you place an order, please contact with us for detail.
Q3: How long is your delivery time?
A: In usual, our delivery time is 20-30 days for radiator, it need 25-40 days if meet busy season.

4.our advantage 
1. Our company has a stable supply raw materials suppliers, guarantee the supply of goods.
2. Our company has many years of experience in production management, ensure the quality of the best products and lowest price.
3. We ensure fast delivery time, after the confirmation of order.

5.Why do you choose SANQI Company?

1).Wide range production line,     

radiators: Over 3000 kinds,

condensers: over2000 kinds, 

 2).Over 100 engineers  develop over 50 kinds of the new item each month to develop market demands.

3).We have a very fast delivery time.

4).Design all the packing with your logo ,

5).Stock list update every morning, you can choose your item without MOQ ,

 6).Save your time and money,offer all the parts you need one time.

7). Passed ISO9001 quality system certification.