ZR-150wa co2 laser power supply

Feature:

1. the 5V/PWM CO2 power source  has LCD display module: (optional) .Because of it, it do not need to open the outside case. Operator can simply find ordinary code faults and output current at LCD display screen of 150W CO2 power source and easy remove the trouble. Also the output current can be adjusted by potentiometer on the LCD module

2.this high voltage CO2 power source uses ordinary H/L/P/G/IN/5V ports to accept laser power's control signal and galvanized steel case.

3.the 5V/PWM CO2 power source has excellent protection function. the 150W CO2 power source has open circuit protection, which make this high voltage CO2 power source has short-term work in the open circuit status which avoid the laser tube burst due to the damage caused by 5V/PWM CO2 power source. in this way it greatly enhancing the 150W CO2 power source's service time.

4.the high voltage CO2 power source has the protection switch. Laser power control is simple, it can use 0-5V analog signal or PWM (pulse width modulation) signal to adjust and control laser power's output.

5. the 150W CO2 power source's control is easy and simple. It adopts high or low level control, the TTL-level control makes laser beam's output start and stop quickly.

6. this.5V/PWM CO2 power source uses imported USA,Japan,German,France and Taiwan's high quality components for major parts to avoid the error in future and strengthen lifetime. The  high voltage CO2 power source can be widely used to drive 2000mm or 1850mm  CO2 laser tube.

7. the 150W CO2 power source has stable laser output features. Each 5V/PWM CO2 power source has been much more rigorous testing procedures, under full load high temperature (52~55 degrees Celsius) 24 hours of aging to ensure high stability of each high voltage CO2 power source.

8. this 5V/PWM CO2 power source's main advantage is high frequency,quick response speed, less volume, less weight, easy operation with complete protecting function.

Specification: