Highway Toll Gate Barrier

GS110

Product Description

The GS highway barriers also so called tollway barriers has designed a high speed barrier dedicated to toll applications, especially highways/motorways, here reliability, endurance and the correct technology to manage major vehicle flows is essential.

GS Highway barrier permits short opening and closing times without the barrier boom bouncing in

the end positions. The lever system locks thebarrier boom at both end positions. In theevent of a power failure,the barrier arm can be fully opened or full closed as optional.

 

The complete drive system is attached to the barrier housing as a single unit, and can easily

be removed from the housing by removing the mounting screws.A built in spring mechanism provides a precise counterbalance for the barrier boom. The springs are factory set to correspond

with the boom length prior to delivery. If necessary, the springs can be easily reset in situ during assembly, for example if the barrier boom is shortened or if signs are attached to the boom.

 

Main Technical Parameters

• Maximum boom length:         3000mm/6000mm

• Opening and closing time:        2s/6s

• Supply Voltage:                 220V/230V

• Frequency:                     50/60 Hz

• Power consumption:              80W

• Rated rotary speed:               30 r/min 

• Rated torque:                      20N·m

• Operation Noise:                    ≤60dB

• Housing: width:                   350 mm

• Depth:                           350 mm

• Height:                          1010mm

• Weight not including barrier boom:    55kg

• Ambient Temperature:              -40oC～+75oC

• Relative Humidity:                 50％～90％

• Atmospheric Pressure:              86Kpa～106 Kpa

   

   

  Technology

• Adopts specially-designed AC220V torque motor. The maintenance-free motor is employed which might be stopped at any position and no damage will be caused. When it is located at the two ends the motor's power shall be automatically reduced to 20W it may save the energy avoid the conditions of condensation and corrosion moreover it may normally work in cold season;

• The driving unit employs sine generator on which the speed-down device is taken off to make the structure be more compact and reasonable; it greatly reduces the mechanical failures

• The special wiring structure may help to avoid the instant heavy current and instant voltage fluctuation in the moment of electric connecting or breaking it may be directly powered by UPS and other equipments in the same power network may be normally worked.

• The housing is made by the special steel board and it's painted by the bisque or nacarat high class paint which may not only prevent corrupting but also may avoid fading for the ultraviolet radiation. Internal mechanical elements treated by electrogalvanisation.

• Side door giving access to the mechanism, locked by key.

•  Aluminium tube boom arm, varnished white with red reflecting stripes and end-sealing.

• Boom arm swing-off, avoiding damage to the barrier in case of impact on the boom arm.

• Arm balancing by springs.