Good performance flat die livestock feed pellet machine for household used
YSKJ Series 120/150/200/250
1.Brief Introduction of Feed Pellet making Machine
YSKJ150 can make the pellets by shaft driving and high-technology, working without water, and belongs to dry-input, dry-output. The pellets made mainly by small breeding can preserve at least half one year.
It is widely used in family and small scale farm. The compressed feed pellet is healthier for poultry and livestock, such as chicken, duck, fish, pig, horse, cattle, sheep, etc.
Raw materials are such as the corn powder, soybean pulp, grass meal, etc.
2.Features and Advantage of Feed Pellet Making Machine
? The feed pellets are with high density, smooth and clean surface
? Formation rate: 98% High capacity,Low investment: suit for family and farm use
? Belt drive or directly connecting drive of this small pellet machine, working with electric power or diesel as optional;
? Auto lubricate system: continuous work and high efficiency
? Alloy steel Roller, extender machine service life
3.Technical Parameter of Feed Pellet Making Machine
|
Type |
Power (kw) |
Pellet Diameter (mm) |
Mould Diameter (mm) |
Output (kg/h) |
Dimension (mm) |
Weight (kg) |
|
YSKJ120 |
2.2-3 |
2.5-6 |
120 |
80-100 |
600*450*900 |
50 |
|
YSKJ150 |
4 |
2.5-6 |
150 |
100-300 |
750*350*850 |
110 |
|
YSKJ200 |
5.5-7.5 |
2.5-8 |
200 |
300-500 |
1150*530*750 |
150 |
|
YSKJ250 |
11-15 |
2.5-8 |
250 |
400-700 |
1250*600*850 |
200 |
4.Working principle
The small Flat-die pellet machine is based on the Mechanical circular motion, diesel engine or motor provide power to drive the transmission shaft, the gear shift to the spindle and mould, makes the mould rob and drive the rollers, under the pressing of the roller, the materials are pressed from the mould hole, then, after the cutting of the cutter, the pellets discharging from the hopper.
The medium-size pellet machines are using motor to drive the pulley to transmission as power, or using the gear in the motor transmission to drive the roller assembly of the transmission, under the pressing of the roller, the materials are pressed from the mould hole, then, after the cutting of the cutter, the pellets discharging from the hopper.