Technique Feature:

1. The maximum spindle speed of 1800rpm.
2. Automatic Tension Control: Stranded, the income received over the end line from the disc tray closed when the line tension of the need is increasing, and the function of automatic tracking adjustment income line tension; so that the entire disk Take-uniform tension, while the machine can not stop tension adjustment.
3. Host oil lubrication, natural circulation cooling, effectively extend the spindle bearing life.
Off-line system uses a new structure, and wire guide pulley from the spindle had a direct line to bow belt, minus the aluminum plate due to the corner on the guide wheel failure caused by the scratching and jump the mobile phone phenomenon.
4. Machine equipped with three compacted unit to ensure conductor after the roundness of strands to reduce the loss of insulating material.
5. Machine with synchronous transmission, the machine without lubrication points, to keep the machine clean, Stranded without oil, various types of surface cleanliness requirements to adapt to the higher line kinds of conductors twisted.
6. Simply adjust the cutter to replace a Citation to take away from the wheel, adjust the cutter to just flip a change to the bar, simple in operation, thus reducing the operator's failure rate and intensity of work.  machine bearings are used well-known Japanese brands, with a bow using new materials, flexibility is good, at high speed to avoid vibration caused by jumping unit, inverter, PLC, magnetic clutches, electromagnetic brakes, hydraulic jack Dengjun imported well-known brand, to reduce the failure rate and maintenance costs.

 Technique specifications:

Machinry type	TF-650P
Application	To adapt to the bare stranded wire, tinned wire, copper clad aluminum, enameled wire, alloy wire such as twisted.
Rotary Speed	1800r/min
Wire diameter	φ0.23-φ0.64mm
Twiting area	0.4-6.0mm
Twiting distance	11.15～60.24mm  14 barrel
Taking-up coil	Φ630mm×380mm×80mm(According to your drawing production), using hand pump hydraulic lift
Main motor	10HP Motor + inverter
Machine size	2850*1500*1660
Twiting direction	S / Z exchange can choose to adjust the cutter to just hand when sliding the cable device at reversing lever, simple operation
Rolling set	Bearing row lines, row of spokes, distance can be adjusted
Braked system	Using electromagnetic brake, internal and external disconnection to the meter when the automatic braking
Tension control	Take-up tension magnetic powder clutch control by PLC programmed to automatically adjust with the Comprehensive tension, constant tension