CD Model Wire Rope Electric Block

 

 

Product information of wire rope electric block:

 

Model CD,MD electric block is a small-sized lifting equipment,which can be mounted on single beam,bridge,gantry and jib cranes,with slight modification,it can also be used as a winch. It is widely used in factories,mines,harbours,warehouses,cargo storage areas and shops,essential in raising working efficiency and improving working conditions.

 

Model CD electric block has only one normal speed,which can satisfy normal application,Model MD electric hoist provides two speeds;normal speed and low speed. At a low speed,it can do precise loading and unloading,mounding of sand box,maintenance of machine tools,etc. Thus model MD electric hoist is more widely used than Model MD.

 

To meet the needs of lifting heavier cargo,our factory also manufacturers WH20,WH32t electric hoist.

 

Technical parameters of wire rope electric block:

 

Item		Specification
Capacity	T	0.25~32 or as required
Lifting height	m	3~30 or as required
Lifting speed	m/min	0.35/3.5, 0.7/7, 7, 0.8/8, 8 or as required
Travelling speed	m/min	20/30 or as required
Wire rope	type	6x37+1
	Dia.	3.6/4.7/7.7/11/13/15.5/17.5/22.5/25.5
Working system		FC=25%(Intermediate)
Power source		380V50Hz, 3-phase AC or as required

 

 

  

RAQ:

 

1.How can I get your best offer(proper solution)before the order placing?

 

The more product request you provide,the more precise offer you will get. Basic factorys for an offer should have(including but no limitation):Capacity,lifting height,voltage etc.

 

2.How long of your products' warranty?

 

It will be 15months after the goods delivered from the loading port.

 

3.Can I have multiple-choice for the lifting tools?

 

Yes,a series lifting tools are available for your choice,just let us know what goods you plan to lift,then the proper tools will be provided.

 

4.How can we install the hoist?

 

Our senior engineer could be attending to your work site give installation guide and training work.