DIMENSIONAL TOLERANCE
The dimensional tolerance of the Silicone Cap

APLICATIONS:
Powder Coating, Wet Coating, E-Coating, Plating, Anodizing.

USES:
This cap is used to mask studs and bolts.

RECOMMENDATIONS for USE:
The inner diameter " A" should be between 0.3 and 0.5 mm below the diameter of the bolt to be
protected so the cover fits well and doesn't fall during the process.
Choose the most appropriate cover length " C" for the length to be hidden.

STORAGE RECOMMENDATIONS:
Storing  this  product  away  from  direct  sunlight  and  at  a  temperature  between  20o  C  and  25o  C  is
recommended  in  order  to  prevent  any  modifications  to  the  properties  such  as  flexibility,  elasticity  or
decolouring, among others.
The material this product is made of possesses  no health risk nor is it considered hazardous requiring
consideration when handling or storing it.

EXPIRY
This product does not expire, but it may lose plasticity and flexibility if stored inappropriately and/or for
more than 5 years.