Pump Diagnostoc Tool

CCR-E200 is the classical model in Euro II serial, which used to test mechanical pumps, like inline pumps, distributor pumps, for example: I, II, III,A, B, P, VE, IW, PL, BQ, Z, P7, PW, PN,PB, P2000,PS7100, EP9, PS8500, P8000, MW etc. kinds of domestic and overseas pumps. It adopts CRT screen display and LED digital display two control systems, can perform various function's adjusting and testing to the injection pump.

 

Features

 

1. Three styles, languages usually Chinese, English and Russian (other languages can choose as customer's requirements).

2. Main engine frequency conversion, manual and automatic two operating modes.

3. Automatic mode can process multi- gears speed preset.

4. Automatic oil measuring and counting system.

5. Low noise and high / low pressure oil supply system.

6. It adopts our own independent electromagnetic valve driving power supply, can protect the equipment from short-circuit.

7. It has two sets of air supply adjustment knobs on right and left sides, easy to detect the toothed bar stroke.

8. Automatic oil measuring flap(optional install).

 

Functions

 

1. Test each cylinder's oil supply quantity under different rotate speed.

2. Check each cylinder's injection timing under static state.

3. Check the performance of mechanical governor.

4. Test the electromagnetic valve of distributor pump.

5. Test the tightness of injection pump.

6. Measure the pump body internal pressure and oil return pressure of distributor pump.

7. Check the performance of pressure equalizer.

8. Check the performance of pneumatic governor.

9. Equipped with DC.1 2V/24V power supply, used for magnetic valve's driving and testing.

 

Technical Parameters

 

1. Main motor power: 7.5KW/11KW/15KW/18.5KW/22KW/30KW

2. Host machine source:380V 50HZ/220V 60HZ

3. Test bench rotate speed: 0~4000 rpm/min

4. Oil supply: 10L/min , 20L/min

5. Oil supply high pressure: 0~3.5Mpa

6. Oil supply low pressure: 0~0.35Mpa

7. Air supply pressure range: 0~0.15Mpa

8. DC power: 12V or 24V( Allow short circuit).

9. Shaft Centre Height:125MM

10. Test bench height from the ground: 830MM

11. Oil tank capacity: 50L

12. Fuel oil temperature: 40±2°C

13. Overall dimension size(MM): 2150*750*1850

14. Weight: 700KGS